I have a AT2 Plus machine and cannot find my manual. the time and date is set incorrectly and I would like to change that. could you please assist me.

i like this site

HI,
To set time on the schiller AT2 do the following.
1. Power ON the machine.
2. Press the following key sequence ALT,9,1,1.
3 Now enter the time using the digit key (HHMMSS)
You will hear the conformation beep indicating that the time is seted.

To set the date on schiller AT2 Do the following.

1. Press the following key sequence ALT ,9,2,2.
2. Enter the date using the digit key (DDMMYY)
You will hear a conformation beep indicating that the date is seted.
ok

Hi there!
You can follow these steps to set the date:
1. Press the right navigation key and press 7.
You should see "SET MODE 1-8" "ENTER NO. OR "V ^"
2. Press 1 for
You should see "1. User Parameters?" "PRESS SET TO SELECT"
3. Press Copy/Set Key
You should see "DATE & TIME" DD-MM-YYYY HH:MM
4. Enter the new Date & Time. You can use the dial pad to enter the values & move the cursor using the navigation keys. If you make a mistake, use to move the cursor over the incorrect number, then overwrite it with a correct one.
5. Press copy/set Key then press the STOP Key
Hope this helps! Please rate if it worked.
Thanks


You can also download the manual here: http://www.retrevo.com/search/v2/jsp/mytrevo/myTrevo.jsp?page=man
Hope this helps

See http://www.fixya.com/support/t8513129-clock_our_rd_xv48dt

{MENU} i {#}{1}{0}{1} i {SET} M:|01/D:01/Y:07 TIME: 12:00AM 2 Enter the current month/date/year/hour/minute by selecting 2 digits for each. Example: August 10, 2007 10:15 PM (12 hour clock format) 1. Press {0}{8} {1}{0} {0}{7} {1}{0} {1}{5}. M:|08/D:10/Y:07 TIME: 10:15AM 2. Press {*} repeatedly to select “PM”. 3 {SET} 4 Press {MENU} to exit. Note: L The other party’s fax machine will print the date and time on the top of each page you send according to your unit’s date and time setting. L After setting the date and time, if the unit is in the copy mode, change it to the fax mode by pressing {FAX}. You can check your unit’s date and time setting on the display. To correct a mistake Press {<} or {>} to move the cursor to the incorrect number, and make the correction.

I read the manual which said to depress the alarm button. That wasn't the right button but I found that depressing the button next to it, the DST button, that that fixed the problem.
Thanks.

Press ALT - 9 - 1 - 1. This starts SETUP. U should b abble 2 change date/time.

First the link to the manual

http://www.brother-usa.com/ModelDocuments/Consumer/Users%20Manual/UM_IntelliFax_4100e_EN_250.PDF

The date and time are set up under general set up. Under that menu there is also TONE/PULSE dial mode setting if you have accidently changed this to pulse it will cause issue. Change it to tone if you have and this will resolve the problem. Pulse is the old style phone system.

Hi,
Please change the Leithium battery fixed inside your fax machine, usually this the problem.
If the Date time is running in different date & time.

Please press Menu, then scrolle left of right arrow key. When you find set Date/Time enter the key mentioned in the Display key and change to your date & time.

After some time see if the date/time working normally. If not change the above mentioned battery.

regards.

Left the flap on the right hand side of the fax machine.
Select Data registration
use the down arrow
1. Data registration
SET
1. User Settings
SET
1. Date & Time
SET
Enter date or time
SET