Red Omnitech 2G long red model

Joey

Sounds like the screen needs to be repaired. If you take phone and push down volume and then plug into USB cable that is connected to computer. Do you see anything?

Mark
Motorola Support

click start control panel administrive tools ,computer management ,device manager look through all of your devices if you see a yellow question mark?or exclamation mark ! or red x
right click to reinstall drivers or
if you can see your usb but its not working:"
ports(com&lpt)right click update driver
if your computer came with a motherboard disk the drivers could be on it:
sometimes the wires inside the cable will be damaged due to bending or stretching or placing heavy equipment upon the cable,
just replace the cable of the hard disk, when you plugged the external disk drive you got that windows could recognize the USB device change the cable everything should work fine again,
check the USB leads that attach to the motherboard usually red-white-green-black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems also make sure the computers Ram and Cmos battery are securely seated
hope this helps

Try to change the usb cable. If still can't, that means your mp3 player usb port is damaged. You will need to get it fix.

MY GOD... I THOUGHT IT AS RED LIGHT..

I have fixed our problem! Hope this helps you out. I downloaded a manual for the 44090 model.
Make sure that you don't have it plugged into the usb port and the player is switched to mp3 mode. Open the software and then when it says to plug it in now, you need to turn the player into music mode. Press and hold for 3 to 4 seconds the centre power/play/pause button. It will start the red light flashing. Once the light is flashing it is in music mode. Plug in to the usb port and the computer should recognise it bringing up the install now button for the software. Click 'install now' and it should work.
I don't use the software to load songs I just use windows media player and once I had passed this install now bit media player recognised it instantly.
Everytime you want to listen to music you need to put the player into music mode by holding down that button till the red light flashes. Once music is loaded on it starts playing as soon as that red light starts flashing!
Good luck and I really hope this works out for you too.

Make sure the hold/lock is not enagged, and make sure the songs are in the correct format

Already answered.

the usb drive may be faulty, take it back to the supplier and get it replaced,as it should not take that long to be recognized by the pc.

good luck
Terry

Just connect it to the pc and transfer music files into it to listen music from it on the move...!!! You should be provided with USB cable for connecting it to the system to access the player...!!!
Have a nice day..!!! Hope a good rating from u...!!!

Thankyou

press on button deeerrrrrrrrrrrrrrr