Question about Kenmore 53092 / 53094 Side by Side Refrigerator

1 Answer

I have Kenmore refregrator model 51272200. Water is leaking inside and forming ice at the bottom of the freezer. The refregrator compartment is warmer than usual. Your help on this is greately appreciated. Thanks

Posted by Anonymous on

Ad

1 Answer

dennis dodge

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,891 Answers

CK THE ICE MAKER WATER INLET TUBE IT MAY BE ICED AND CAUSING THE WATER TO RUN DOWN THE BACK / ALSO CK THE DRAIN IN BOTTOM OF FREEZER / A VERY COMMON PROBLEM . THIS WILL ICE THE BOTTOM OF FREEZER FLOOR AND RUN OUT ON FLOOR .. .. MM HOPE THIS HELPED ..

Posted on Jul 01, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore bottom freezer refrigerator warming up


Hi
There is a definetely leak in the cooling gas.
Firstly... You will need to find from where the gas has leaked. It is usually on the compressor pipes..... but not always.


Secondly you are right about the Water Valve... it needs to be changed.
Regards
Berry

Feb 02, 2010 | Kenmore 73502 / 73504 / 73509 Bottom...

1 Answer

Water is leaking from top part of freezer down to bottom of inside of the frig. Frost is on the top of the frig in the frigerator.


FIRST STEP: UNPLUG THE REFRIGERATOR. AFTER IT'S UNPLUGGED, DO THE FOLLOWING:

Remove the food from the freezer compartment and place inside the refrigerator temporarily.

Remove the bottom panel and back panel from inside the freezer compartment. You will probably notice that the bottom of the inside of the freezer is covered in ice. Use hot water (not boiling) from the tap and pour it on to the ice that is formed on the inside of the freezer compartment to melt the ice.

CAUTION: DO NOT USE A HEAT GUN TO MELT THE ICE AS IT WILL MELT THE INSIDE OF THE FREEZER COMPARTMENT. ALSO DO NOT CHOP AT THE ICE WITH A SHARP INSTRUMENT OF ANY KIND AS THIS WILL PUNCTURE AND DESTROY THE INSIDE OF THE FREEZER.

If you have a wet vac, you can remove the melted water using the wet vac. Or you can use a towel to mop up the excess water. You will still have to pour hot water onto the ice until all of the ice in the freezer is melted. Patience is key as it takes time to defrost all of this ice.

You will see a drain hole in the back of the freezer compartment that is still clogged with ice. You will need to continue to apply hot water until the ice has completely melted.

Note: When the ice in the drain breaks free, you will see all of the water disappear as it empties out.
In Whirlpool refrigerators, the water runs to a tray underneath the refrigerator. You will hear the water empty out into that tray. Then you will know that you have completely cleared the ice from the drain pipe in the freezer. To double-check this, take a small cup of warm water and dump it into the drain hole and you will see it visibly disappear and run into that tray underneath the refrigerator.

Replace the freezer panels back into the freezer compartment and plug it back in and return your freezer items back in to the freezer and you should be all set.

Oct 17, 2009 | Whirlpool 21.0 cu. ft. Top Freezer...

1 Answer

Ice is forming on the bottom of the freezer (Kenmore).


Self-defrosting refrigerators dispose of the water generated during the defrost cycle, usually via a tube or channel that directs the water to a pan at the bottom of the refrigerator. From the pan, the water normally evaporates. (See a more detailed explanation of this in the How Things Work section of our website).

If the tube or channel is clogged or obstructed, the water backs up and leaks into the inside of the refrigerator/freezer compartment. Then the water builds up at the bottom, inside of the refrigerator/freezer. When the water has built up for a time it may spill out of the front of the door opening. To fix this problem, clear the drain tube or channel and allow the defrost water to flow down to the drain pan.

Jul 24, 2009 | Kenmore 73502 / 73504 / 73509 Bottom...

1 Answer

Water weeping out vents in lower back of freezer compartment


Hi,
The drain for the water to get away when defrosting is frozen shut...
Checkout this tip to help you..

Water Running in Refrigerator from Freezer2_bing.gif
http://www.fixya.com/support/r3780310-water_running_in_refrigerator_from

heatman101

Jun 29, 2009 | Kenmore 73502 / 73504 / 73509 Bottom...

1 Answer

Water leaking and ice in bottom shelf of freezer


Chances are you have a bad seal around the door if it's leaking from the inside which causes the ice to form as well, or if it's leaking from under the freezer you lave a bad heating element that evaporates the water collected in the pan under the freezer or you have a clogged hose that goes to the pan under the freezer which also causes the ice to form because the water has no place to go. Defrost and try to find a way to blow out the hose that goes from your freezer to the pan under the freezer and that should take care of your problem.

Apr 18, 2009 | Refrigerators

1 Answer

Ice build-up in freezer - Kenmore Model C978-66795-2


don't know this appliance but for guidence:
some appliances have the evaporator in a compartment at the top of the freezer and the drain comes out of the back and runs externally to the drip tray. there should be a grill in the compartment so just peer into it and see if there is ice build up.
wherabouts is the freezer ice forming?

Sep 04, 2008 | Refrigerators

2 Answers

Kenmore coldspot - How do you remove the ice maker box to clean


I have the exact same Kenmore and exact same model #77292798. It's the top freezer model with ice maker. Here's what I did:

Empty everything in the freezer.
Turn water to ice maker off from source behind unit.
Remove bottom panel (two screws)
Every screw in the freezer is the exact same size. I used a screwdriver style socket and, I think
this works the best.
Remove ice maker (4 screws) and unplug from socket.
Remove rear panel (2 screws).

My freezer was loaded with ice underneath the bottom panel. The ice scraped away easily. There is a tin pan underneath the coils that drains toward the middle where the drain hole is. Again, my freezer was full of ice beneath this tin pan and, I had to scrape away. You may be tempted to try and remove the coil because it would be easier to get to drain hole. I tried this and, it did no good. Don't try it. Once all the ice was scraped away, I realized that the drain hole was plugged with ice. I used boiling hot water and used a squeeze bottle to pour the hot water into the drain hole. I then wrapped a paper towel around a thin screwdriver and used that to soak up the now cold water in the drain hole. After doing this a dozen times or so, the drain finally cleared.

Then, reassemble. This was a much easier task than I thought it would be and, will take care of it much quicker next time.

Mar 18, 2008 | Kenmore 18.3 cu. ft. Top Freezer...

3 Answers

Ice forming on bottom of freezer


Switch off the power
First keep all the items out
Open the door and remove all the fixers
let the whole body will be get dry
check the freezer is there any gap between the door

Let me know if your problem is solved and rate me as FIXYA!

Mar 07, 2008 | Kenmore 73503 Stainless Steel Bottom...

Not finding what you are looking for?
Kenmore 53092 / 53094 Side by Side Refrigerator Logo

361 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Refrigerators Experts

gbob59

Level 3 Expert

3063 Answers

Dale Copeland
Dale Copeland

Level 2 Expert

129 Answers

Cindy Wells

Level 3 Expert

6220 Answers

Are you a Kenmore Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...