Haier HD451E Dehumidifier Logo

Related Topics:

Posted on Jun 30, 2010

What does an E2 code mean? I have a Haier Dehumidifier that is about a year old, I emtied the bucket and put the bucket back into place and hit the start button and nothing happen I unplugged the unit and error code E2 keeps comming on

2 Answers

Josephine Maxwell

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Aug 08, 2014
Josephine Maxwell
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Aug 08, 2014
Answers
1
Questions
0
Helped
15571
Points
1

We have an E2 message on this and it is hooked to a hose into a drain tube so it has nothing to do with the bucket placement.

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on May 20, 2013
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: May 20, 2013
Answers
1
Questions
0
Helped
15571
Points
1

What does an E2 code mean?

I have a Haier Dehumidifier that is about a year old, I emtied the bucket and put the bucket back into place and hit the start button and nothing happen I unplugged the unit and error code E2 keeps comming on


  • Rachael Nicole
    Rachael Nicole Oct 17, 2018

    I have the same problem right now it was working fine I empty the bucket put the bucket back in and the E2 keeps coming up. Ive cleaned the filter, the bucket, tried different outlets and seeing as its about a year old and the small one cost me almost $350 im not happy at all. And dont know who to call

×

Ad

4 Related Answers

Anonymous

  • 121 Answers
  • Posted on Jun 24, 2008

SOURCE: GE dehumidifier light says bucket is full but it isn't

Try feeling both sides of the outside of the bucket and make sure the bucket is flush with the dehumidifier. If one side is sticking out more than the other it may notbe engaged correctly which will cause a full bucket notification. If everything checks out ok there try takng the bucket out and push in on the button that the lever from the bucket engages on at the dehumidifier. If the light turns off after you push on the red button that means the bucket is not engaging correctly. If the red light stays on and it doesnt make a difference he button sensor may be defective. If you found this solution helpful please rate it.

Thanks - Tech101

Ad

Anonymous

  • 1 Answer
  • Posted on Sep 13, 2011

SOURCE: haier dehumidifier model de45ej-t What does

Dehumidifier (DE45EJ-L) shows only E2 on the display -- no "buttons" work. Had been working perfectly -- we turned it off a few days ago. Any suggestions??

Anonymous

  • 4736 Answers
  • Posted on Apr 14, 2011

SOURCE: Hi, When I tried to

Your model is no longer in manufacture or available. However, I was able to locate the Owners Manual for you. It does not list a CH 01 Error Code, but does list other reasons why your unit want turn ON.

http://www.lg.com/us/support/product/support-product-profile.jsp?customerModelCode=LHD45EL&matchedModelCode=1000001989&searchEngineModelCode=LHD45EL&targetPage=support-product-profile&initialTab=documents#


In the past, I have recommended turning the Master ON/OFF Switch to OFF and unplugging the unit for 12-15 minutes. This will give the unit time to hopefully, reset itself. Then Plug the unit back in and turn the Master ON/OFF Switch to ON. Set the humidity control as you normally would. If it successfully reset itself, it should operate normally.

If you continue to have problems, contact LG Customer Support at 800-243-0000.

Hope this helped you to solve the problem.

David Shaub

  • 2994 Answers
  • Posted on Jan 31, 2009

SOURCE: I have a 45 pint

It's for when you dump the bucket. You put the cup in to catch the drips while you're dumping it.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Haier Dehumidifier says 'bucket full'.

It sounds like the switch needs to be replaced or adjusted.

https://www.google.com/search?q=Haier+Dehumidifier+says+bucket+full

Need model number. That is needed in all Fixya questions.

https://www.google.com/search?q=haier+dehumidifier+parts+list

..
0helpful
1answer

My Haier dehumidifier has the bucket full light on and won't reset. It's only a month old. I tried unplugging, resetting and i'ts still stuck on bucket full. Any ideas on how

sorry to say but the bucket level sensors on these tend to be a bit tricky , it seems theres two possible holes the piviot point for float can go in , only one is correct for sensor to hit right , but both allow float to swing , and there not marked either
0helpful
1answer

Dehumidifier not turning on showing an e2 code

Lisa, unfortunately, Haier for whatever reason does not list what error codes mean, in their Owners Manual. You will have to contact Haier Customer Support 1-877-337-3639 for that.

In the meantime, turn the ON/OFF Switch to OFF and unplug the unit for 15 minutes. Then, plug the unit back in and turn the ON/OFF Switch to ON. Hopefully, during that 15 minute timeout, the electronics reset and reverted back to the original factory settings. If they did, you can set the controls as you like.

Hope this helps you and thanks for choosing FixYa.
4helpful
2answers

My dehumidifier is showing an E2 code on it. It is a brand new haier, can you help me out with this problem?

E2 Code indicates a Sensor Error automatic shutdown. To find out which sensor it is you will have to call Haier Customer Support 1-877-337-363.

In the meantime, turn the unit OFF & unplug it for 15 minutes. Then plug the unit back in and turn ON. ON. Hopefully the unit reset itself and reverted back to the original factory settings. And you can set te humidity extraction level where you desire. If the error code reappears, definitely contact Haier, as youtr unit is still under warranty.
0helpful
1answer

Unit does not start, shows E2 error, can you help on what that code means and resolution

I have searched and searched and have not been able to find an Owner's Manual for your model Amcor Dehumidifier. I did discover that Haier and Fredrich both have similar models, So similar, I suspect Haier manufactured them. But, neither the Haier nor the Fredich's unit have any information concerning Error Code 2. Plus, the ratings for your Amcor model were not very good. Seems that Amcor is riddled with problems.

In any event, lets try to solve your problem. First, turn the Master ON/OFF Switch to OFF. Unplug the unit from the wall outlet and remove the water collection bucket and the air intake filter. Check the filter closely for significant dust and dirt buildup and clean it if necessary. Make sure the filter is thoroughly dry, before placing it in the unit. Leave the unit unplugged for at least 15 minutes or until the filter is dry. Then replace the filter, insert the bucket - making sure that it fits swaourely from top to bottom into the bucket holder. Plug the unit back in and turn the Master ON/OFF Switch to ON. Hopefully, the 15 minute timeout has allowed the unit's electronics to reset themselves and they reverted back to the original factory settings. If so, set the controls to your liking and the unit should start and run like it should.

Hope this helped you troubleshoot and solve the problem. Please let me know. Thanks.
0helpful
1answer

My dehumidifier is two years old and only used during the summer months. This season it is running but not removing moisture from the air...the collection bucket is completely dry. Help!

Hi,
There are many reasons why a dehumidifier willnot work or collect water.
Here is a tip that I wrote to help people to figure out what is going wrongwith their dehumidifier

Dehumidifier is running but no water is in bucket

heatman101

';';
';';
0helpful
1answer

Empty the bucket and put back in, will not restart and light is on.

Hi,

Here is a tip that explains what can be happening to make the dehumidifier showthat the bucket is full when it is not.

Dehumidifier Problem It shows Bucket Full

heatman101
9helpful
1answer

Haier dehumidifier model de45ej-t What does code e2 mean? Unit does not run.

Dehumidifier (DE45EJ-L) shows only E2 on the display -- no "buttons" work. Had been working perfectly -- we turned it off a few days ago. Any suggestions??
Not finding what you are looking for?

15,581 views

Ask a Question

Usually answered in minutes!

Top Haier Dehumidifiers Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Haier Dehumidifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...