Makes a bang sound and spit sout steam

Yes. The machine has indeed bursted a pipe. Contact the company from where you bought the machine for warranty or repair solutions. Its strongly advised against trying to repair the machine yourself.

It may be clogged .Descale and try again.

I suggest that you use the commands to "close the machine" for transport and then re-start it as if it was new. I had to get rid of my EA8250 after only 2 years as mine stopping working as well. I tore it apart and saw a lot of wear for such as short time. My grinder also stopped. KRUPS says you cannot use Oily beans but only after you buy the machine.

The steam valve is not closing. In such a case water finds an east exit from the machine where there is no back pressure.

Repair the steam valve.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edward_bbd2c7ff4ee1828a

i have only read the first bit but the problem is that were you have the coffee filter holder you also have a seal which you have to change

Take it back to the retailer, tell them about the noise and the water leak. It's under guarantee so you should not be looking for any self help solutions, it's faulty.

when i place pod in seal it spits and spatters all over

the seal on the filter is broken? its a replacement part

Would you like to try not put too much coffee powder, and not make the coffee powder too firm ( I mean not press them too heavy.)

Or, not grind the coffee powder too thin....

Hope it helps you.

I sell lots of new and used parts for various coffee machines, but specialize in Krups. If interested in purchasing a Krups brew head seal at a resaonable price, contact me at [email protected] and I'll make arrangements. I purchase the groups seals directly from Krups and they will arrive sealed in the manufacturer's original plastic packaging. I accept Paypal to make the transaction safe and secure for us both.