RCA HDTV Monitor; menu popping up and volume going down

Hold the power button and the volume up button when u see the screen come on let go of the power button but keep holding the volume up button the android man will pop up u after hold the power button amd tap the volume up button the recovery screen will pop up go down with volume down button to wipe data press the power button to select it go down to yes then select that it will erase the table it will go back to recovery mode the go to reboot select that and it will restart your tablet

Thats the classis sign of a failed small signal board. You can get replacement signal boards from www.tvrepairworld.com

Are you holding the menu button down when the monitor is off or on? Are you keeping the menu button held down when you push the power button to turn it on?

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00748106&cc=us&lc=en&dlc=en&product=3194521#N57...vv
Are you holding the menu button down when the monitor is off or on? Are you keeping the menu button held down when you push the power button to turn it on?

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00748106&cc=us&lc=en&dlc=en&product=3194521#N57.

Sounds like one of the buttons on the monitor is sticking physically. Try:

• checking the buttons for dirt that might be holding it in
• cleaning the buttons with a soft brush

Try this:

Under the menu options, there's Menu Lock. Switch it to "On". It worked for me.
My menu button wasn't working, so to access the menu, I had to hold down the arrow up button and push the arrow down button till I got to the Menu Lock Option.

Your front panel buttons need to be replaced. They are sticking or are shorted.

My TV was doing the same thing. Someone told me to disconnect the front menu buttons and this worked for me. The board goes haywire. You have to take off the front black panel on the bottom first then the grey front panel where the controls are. Once you do this you will see where there is a plug from tv to the panel where the control buttons are. Just disconnect. You will only be able to use your remote for TV. Its a cheap and easy fix. Just lots of screws to get the panels off and on. Good luck!

Yes. Its probably a stuck button on the TV's front panel. Try pushing or wiggling each button on the panel. It could be the channel up/down buttons or volume up/down, menu, etc.

When there is a button that is making slight contact, it keeps the microprocessor busy attending to the command its erroneously receiving from the offending button and may not allow other functions to work when this occurs.

It doesn't matter which button is stuck, any of the symptoms you describe can happen.

michtech

Hey there!

Its really easy to do, but write down any settings before you go changing them..


1. Turn off tv.

(use buttons on tv for this)

2. Push volume down and channel down both at the same time, and hold them for about 10 seconds, or until the tv turns on.

are buton on remote sticking or on tv it self clean controler tap on button