I can not get my wheels to unlock on my riding mower LXT 1000 Model # 917 272461

Graeme, usually you remove the rubber/plastic axle/hub cap, jack mower up and secure from falling, next remove retaing clip( C clip, cotter pin, etc), and washer, slide wheel off. Check the attached links,instruction and guides, could not find your model, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Changing Front Tire on The Craftsman
Removing Wheel from Riding Mower
http://support.mtdproducts.com/app/answers/detail/a_id/203/~/wheel-removal---riding-mower

http://www.cubcadet.com/webapp/wcs/stores/servlet/ARIPartFinderView?storeId=10051&catalogId=14101&langId=-1#/s/CUT/782/

go here. change the model number to your 1045 then go to attachments. they have exploded views to show layout

The fuse on my LT1024 is under the hood beside the battery on the right hand side of the mower.

Please provide model #.

Try online at "SearsParts" and type in your model number and you will see how to get the information you want. Be blessed.

as with all floats there is a pin that goes through the hinge of the float. normally goes in one way unless the bowl holds it in. just pull it out and the float and the needle will come out.

behind the plastic covers on the side of the tractor part there is adjustment nuts

no manual but can i help you threw the problem your having?

i think you could have a timing problem check to make sure

sears has them on a hook where the filters are located.