Need free driver download for dynex dx-pwlmse

The Dynex DX-PWLMSE uses a 27 MHz frequency wireless connection between the mouse and a specific USB receiver. For the specifications, see https://www.dynexproducts.com/pdp/DX-PWLMSE/8632063 .

To use the mouse, you need to press the Eject button behind the scroll wheel. This lets you open the battery/USB storage compartment. Put two AAA batteries into the mouse. Then remove the USB adapter (it's between the two battery slots). Close the storage compartment and put the USB adapter into an available USB 2.0 slot on the computer with a version of the Windows OS above Windows 98. (Note: the specifications I see indicate Dynex wrote drivers for Windows Vista. It may not work with Windows 7, 8 or 10.) Make sure that the computer is on and can get driver updates from on-line sources. Turn on the mouse and it should auto-pair with the receiver. If there is no response, try pressing and holding the connect button on the bottom of the mouse.

I'm not aware of any vendors that sell the USB receiver for this mouse. The manual for the DX-PWLMSE is available from Manuals Lib: https://www.manualslib.com/products/Dynex-Dx-Pwlmse-Wireless-Optical-Usb-Laptop-Mouse-4908.html .

I hope this helps.

Cindy Wells

Assuming you are using a newer version of Windows...Insert nano adapter into an available USB slot and the system should auto detect the adapter/mouse.

Setup guide is available at
https://www.dynexproducts.com/pdp/DX-NPWLMSE/2380794

Hi.

There should be a small button on the underneath of the mouse which should say "connect" press that button and also the one on the USB receiver if it has one. Also check if you have put the batteries in the right way round.



Regards.

get to the mouse manufacturer web site
select the down load for your model to suit vista
down load and run

i have the same problem

Are you using it on a mousepad? If not, that is probably why you are getting jumpy and erratic movement. Put a mousepad underneath the mouse and you should see the cursor movement improve.

You can also adjust the mouse properties such as speed and control by going into the Control Panel and opening the Mouse applet.

Do you have the correct Dynex driver installed? If not, go to the Dynex website and download the driver for your mouse. Having the wrong driver (or a generic driver) can make a difference in performance sometimes.

Hope one (or all) of those solutions helps!

Here you go:

http://www.dynexproducts.com/products/computers/DX-PWLMSE.html

go to control panel= mouse =under buttons uncheck button configuration.

Rollover the drivers

Have you tried going into the control panel - mouse - pointer options - motion speed (slower) and experiment with pointer precision check box? Try it, see what that gets ya.