Helloi have a problem with a panasonic 47wx49e in the convergencehorizontal red lines cant be staigthevery adjustin conventional mode are working but when i get inside of the dynamic convergence adjusts the red key is not workig at allcut be the little digital convergence module or is somthing else i already change the stksi appreciate any help thank you very much.

if convergence does not adjust in menu mode could be a defective convergenceic or fuse

You need the panasonic convergence repair kit #1 which comes with instructions with pictures. Heres a link to the correct kit for your model.
http://servicemanuals.vstore.ca/product_info.php/pName/panasonic-projection-tv-convergence-repair-kit-1/cName/convergence-repair-kits

There should of been a protective screen for this model. Here are some links to obtain original replacement screens from a major Panasonic distributor if needed:

Panasonic PT-47WX49E Replacement Part Protective (Outer) Screen

Panasonic PT-47WX49E Replacement Part Lenticular (Middle) Screen

Panasonic PT-47WX49E Replacement Part Fresnal (Inner) Screen

converge outputs getting tired or limiting resistors opening up. adjusting this incorrectly will make the situation worse keep in mind that overdriving these chips will cause a fold over of your image when you see this carefully adjust in the opisite direction as you may be overheating the outputs

does the led indicator blink? If so how many times does it blink?

your convergence IVs need to be replaced. Its an easy repair if you can solder. you can get the two ICs you need at the following link. they also provide free installation instructions and free on line tech support while youre doing the repair. You need two ICs they are numbers STK392-110. Let me know if I can be of further assistance. I am one of servicemanuals support techs and board rebuilder.
http://servicemanuals.vstore.ca/

i have a Panasonic Projection HDTV pt-47wx49e and the picture comes in jumpy and very discolored is there any thing i can do to fix it.

may not be convergence may be a bad stk for convergence if that style if so try stk

got this used cant get remote to work

scott iam in need of one too would you PLEASE add me to your list Thanks so much