Question about Sharp R-1610 Microwave Oven

1 Answer

Microwave quit Hava a Sharp microwave model 1450. The turntable and (motor?) quit. Everything else seems to work. Are ther fuses I can look for? Do you have a wiring diagram? Any suggestions? Thanks in advance, Doug

Posted by jnader270 on

Ad

1 Answer

Mukesh Kumar

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,230 Answers

Hi there,

Well first of all you can try to clean the turntable- Remove your glass turntable cooking tray from your microwave. Gently wash with warm soapy water to remove any debris. Next remove the turntable guide and clean it in the same manner, with warm soapy water. Pay particular attention to the turntable rollers. There could be spilled food particles caught in the rollers, hindering the rollers' movement. Also, gently cleanse the internal cavity of your microwave, paying special attention to the area below the turntable. With the internal cavity, turntable, and turntable guide completely clean and dry, return the parts to your microwave. First place the turntable guide on the bottom of the microwave. There should be a circular groove in the bottom of the microwave cavity keeping the turntable guide in place. Follow the guide with the turntable cooking tray. Carefully place the glass tray over the turntable guide and onto the drive bushing. The drive bushing should fit neatly into the grooves on the bottom of your glass cooking tray. It may take some adjusting before the tray will sit properly onto the drive bushing. If further you have the same problem then this could be a failing turntable motor...... Please post comments for further help or information.......

Good Luck!!

Thanks

Posted on Jun 25, 2010

  • jnader270 Jun 25, 2010

    Sorry I didn't make myself clear. The whole microwave process has quit, meaning that motor along with the turntable not working.

  • Elvis Presley Sep 02, 2013

    what a silly reply by Mukesh, the person said its not turning and the reply was clean the microwave.

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My over the stove Sharp Carousel Model # R-1505F turn table stopped turning. What part do I need to replace. Also, I broke the glass turn table plate. What size is that and where can I order another...


Sears Parts Direct has the parts diagrams and many parts for the R-1505 microwave. The glass plate is part 4-3 ($33.99) on this page: http://www.searspartsdirect.com/partsdirect/part-model/Sharp-Parts/Microwave-Parts/Model-R1505/0958/0123370/50019999/00001?blt=06&prst=&shdMod= .


Without more tests, I can't be completely positive but the turntable motor is the likely problem. That is part 1-4 on the list above. However, it could be a wiring problem with the wiring to the turntable motor.

Partstore.com has many of the parts as well: http://www.partstore.com/Model/Sharp/Sharp/R1505.aspx .

I hope this helps.

Cindy Wells

Jul 29, 2011 | Sharp R-1505 Microwave Oven

1 Answer

SHARP MODEL R895(SL)M TURNTABLE NOT TURNING


Check turn table motor operating voltage on the motor if the voltage is normal then check motor pulley(crack or broken) ,if o.k replace motor with the same type,if the voltage is missing go to the control panel and find out any wiring problem,if everything o.k replace control panel.

Jan 15, 2011 | Sharp R-303CW Convection / Microwave Oven

2 Answers

We have a sharp r-9h84b convection microwave and the carosel has stopped working when the tray is in place. Any thoughts the carrosel seems to rotate very slowly when there is nothing on it.


It's almost certainly a bad turntable motor.

The part number was RMOTDA079WRE0 but it is listed as no longer available.

In some cases, older microwaves are available locally at repair shops or on Craig's List.

If you want to keep your eyes open, this same motor was used in the following Sharp models:

R9A20
R9A50
R9H11
R9H60
R9H66
R9H71
R9H73
R9H76
R9H80
R9H81
R9H81B
R9H83
R9H84
R9H84B
R9H91
R9H91B
R9H93
R9H94
R9H94B

Good luck.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

May 23, 2010 | Sharp R-9H84B Microwave Oven

2 Answers

Have a Sharp R-230 Microwave with a turntable that stopped rotating. Everything else is fine. Any advice?


This is fairly common one, the Turntable Motors often turn their toes up, and are a fairly simple replacement. You may be able to do it yourself, BUT I recommend you get a serviceman to do it. That would be much safer. MW are lethal. Due to the HUGE Power Capacitor inside.

Feb 14, 2010 | Microwave Ovens

1 Answer

My 1450 blew the in-line 20amp fuse, just


sounds like the H.V. diode,capacitor,or mag is shorted first 2 items are cheap, the mag gets pricey, call "Appliance Parts Pro's" they can help you on parts great prices and fast shipping

Jul 27, 2009 | Sharp Microwave Ovens

1 Answer

Sharp 1870 just quit cooking and no turntable


The fact that the microwave and convection both do not heat indicated that the oven is in demo mode, check the user manual, otherwise it will possibly be a relay not triggering, may need a pcb replacement, check Demo mode 1st....Phil

Jan 08, 2009 | Sharp Microwave Ovens

1 Answer

Microwave turntable won't turn


Most likely the turntable motor itself is bad - not an uncommon problem for that model.

Check with www.martinmicrowave.com (toll free 1-877-894-0035)

unfortunately, the particular motor used in your model is rather expensive - + - $50

Dec 23, 2008 | Sharp R-930AK Convection/Microwave Oven

2 Answers

Turntable doesn't turn


If you just purchased and Installed the microwave, I would call Sears and tell them what is happening, generally, it would still be under warranty if less than a year old. If its a countertop model, you may have to take it in, otherwise they should come to the home for the repair. I would also NOT indicate that you have looked at it as that would void your warranty.
Otherwise, it seems like the problem could be, a) touchpad , b) a relay or c) the main control board

Feb 02, 2008 | Kenmore 62642 / 62644 / 62649 Microwave...

1 Answer

Turntable repair? GE Profile model JVM1660BB


IF EVERYTHING IN THE OVEN IS WORKING BUT THE TURNTABLE YOU HAVE TO TAKE THE BOTTOM COVER OFF THE OVEN THE MOTOR HAS TWO WIRES ON IT, BE CAREFULL
WHEN YOU TEST IT AS THERE IS 110V ON THE WIRES.IF THE 110V IS THERE BUT THE MOTOR ISN,T RUNNING TAKE THE
TWO WIRES OFF,AND TAKE THE MOTOR OUT AND BUY A NEW ONE. YOU CAN DO THIS BUT DO BE CAREFULL.. YOU
MAY HAVE TO PULL ON IT A LITTLE TO PULL IT APART FROM THE PEACE INSIDE THAT TURNS THE GLASS TRY NOT TO BREAK IT!

Jan 20, 2008 | GE Spacemaker JVM1640SJ Microwave Oven

Not finding what you are looking for?
Sharp R-1610 Microwave Oven Logo

475 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Microwave Ovens Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Cindy Wells

Level 3 Expert

6199 Answers

Brad Brown

Level 3 Expert

18520 Answers

Are you a Sharp Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...