Time and Date

Press

function
71
set
enter date and military time
set
stop

At standby the display will show the date and time. Once the standby display is set, it will automatically be
updated.
General Description
Setting the Date and Time
1 SET MODE (1-8)
2 USER PARAMETERS?
3 DATE & TIME?
4 01-01-2001 15:00
5 Enter the new date and time.
Ex: Date : 10th
December: 12th
Year : 2001
Time : 3:00 PM
If you make a mistake, use or to move the cursor
over the incorrect number, then overwrite it with a correct
one.
10-12-2001 15:00
6
7
1
1 0
1 2
2 0 0 1
1 5 0 0

Press

Function
71
set
key in date and military time
set
stop

Press

Function
71
set
enter date and miltary time
set
stop

To change the Date/Time, do the following:

1. Press Function key
2. Press 7
3. Press 1
4. Press COPY/set
5. Enter date (2digits)
6. Enter month (2 digits)
7. Enter year (4 digits)
8. Enter time (4 digits military time)
9. Any mistakes can be corrected using the < > arrow keys to place cursor over the character to change.
10. Press COPY/set
11. Press STOP

This should answer your question. All the best.
Greg

press function-7-1-start- change the time and date on the machine. then hit start then stop

function-7-1-start change time and date

Now this solution isn't mine, I found it here and we can't even credit the poster since they were signed on as 'Guest' only:
Guest
Rank: Apprentice
Rating: 0%, 0 votes
1) select function #7
2) select #1
3) select "set"
4) enter the new date and time (MMDDYYY) (1500 - 3:00 PM) 5) select "set" and stop 

to fix the time and date press function-7-1-start-fix the time and date-start-stop

good luck

press function 7, user parameters, use arrow keys to sccroll through and set time date, ID, logo etc press start or set to confirm