??? what is H

Oh please don't tell us what router, remote or anything else that would actually help find a solution to your problem. We'll just sit here and ignore your question.

Usually there are a few small screws that have to be removed, and two locking clips near the top that will release it. The screws are usually under the backspace bar, or one of the longer bars on the keyboard, carefully pry the backspace bar and you'll see them.

in the top right hand corner, there are 3 little bars, click your mouse pointer on it.. click bookmarks or history, you should be able to find them, then open a fav page ad click the star at the end of the address bar, save the page as a fav.

If you have any Heavy duty speakers or anything with magnets near them, the magnetic field could do that ....

It's the data. EVDO

press shift key 5 times then go to setting and uncheck all 4 option and apply.please rate this.

Press 277634#*# - then Modem Setting - then Network Mode - then Network Mode - then select 2G Only. This will turn off 3G and you will now be using 2G or Extended Network. Either or, I used to have the same problem, but after making that simple change I have an extra "bar" on my phone.

Hello,,,
Your Canon A80 has problem of defective CCD Imager Sensor and this part need to be replaced.
Good news is that Canon will replace CCD Imager free of cost as per announced free of cost repair scheme.
Click on Canon CCD Advisory for details how to obtain free repair facility.
Good Luck....

please clean your motherboard with accitone
and give a little bit of heat on motherboard
hope it works

for more information
you can mail me
[email protected]
thanks

This set has had a problem with the LVDS cable from the Main PCB to the panel. The wires are delicate and the connection is not that great. Sometimes unplugging and reseating the cable does clear intermitent problems like yours up. Good Luck