JGP645BEX1BB GE GAS COOKTOP

SOURCE: ge spectra gas stove top not lighting

no gas flow sounds like a bad gas regulato on the stove. as for the 5 year old ge profile with ignitors not working, you need a part called a spark modual

SOURCE: igniters are not working right

when you turn any burner control to lite all ignitors should click this is normal industry wide. the ignitors are controlled by switches that are placed over the valve shafts they are wired up together so thats why they all click when you only operate one valve don't worry about it. the ignitor stays on untill you back the valve off a tad this is also normal.

SOURCE: ge spectra gas stove top not lighting

If your top burners are not lighting or will not work, it is possible that the burners have become dirty or wet. Please follow the troubleshooting directions below before calling service:

1. Turn you burner to the Lite position:
   
   If you hear clicking or sparking, go to Step 2.
   
   If you do not, check your circuit breakers. If the circuit breaker is ok, we recommend that you schedule service by calling 1-800-432-2737 or schedule service online.
   
   
2. Clean the burner and electrode:
   
   First remove the burner grate, cap, and head. Use a needle or paper clip to poke through the holes on the burner head. Re-assemble and try the burner.
   
   Remove the burner grate, cap, and head. Even if it looks clean, wipe the tip of the electrode with a clean, dry paper towel and PRESS IT DOWN. Re-assemble and try the burner, again.
   
   Check to see if the burner works, If not, then go to Step 3.
   
   
3. Re-assemble - Make sure that each burner top matches its burner bottom. The burner top will lay flat if put on correctly.
   
   Check to see if the burner works, If not, then go to Step 4.
   
   
4. The spark igniter is operating properly, but the burner is still not lighting. At this point, we would recommend that you schedule service by calling 1-800-432-2737 or schedule service online.
   

SOURCE: clicking of the burner ignitors

I pulled out the electrical cord and then let the system dry out for about 8 hours. When I plugged in the oven again, the clicking had stopped.

SOURCE: GE Gas Kitchen sealed burner

I unplugged the wires from each end and re-attached the wires. Stove working great, no more clicking.