"Driver not installed"

1st You download Webcam Driver.
Mac mini has no drivers
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

look for a driver on the mac mini that is compatible... go to right click to find compatibility reference and change it if necessary

go to www.samsung.com download and install mac driver for ML-2510 works like a charm for xerox phaser 3124

It would be better if you install the software/driver first in your computer. The software also shows you the instructions on how to setup the printer itself. Here are the drivers available for download in the Lexmark website. Just click on the driver compatible with your computer's operating system.
- Lexmark X75 AIO Printer driver for Mac OS X, Mac OS X 10.1, Mac OS X 10.1.5, Mac OS X 10.2, Mac OS X 10.2.1, Mac OS X 10.2.8, Mac OS X 10.3.x, and Mac OS X 10.4.x.
- Custom Driver for Microsoft Windows 2000
- Driver for Microsoft Windows XP
These are the only available drivers. That means the printer is not compatible with Mac 10.5, Mac 10.6, Windows Vista and Windows 7.
For additional information, here's the Setup Sheet (Lexmark X74, X75) and the User's Guide (Lexmark X74, X75) . Hope this helps.

no mac driver for that printer

If you do not have the disk you must download the software from Internet, follow instructions below,

Click here:Epson Stylus C46 : Drivers & Software

A web page will open, follow instructions, select model, select operative system etc., and click on download .
Chose to download the file in my documents when asked.
Afterdownloading,findthefile,doubleclick on the file, then if you get introubles,follow theinstructionsbelow to reset and reinstall drivers:

• Unplug printer USB.
• Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.
• Download driver from website and run the file.
  
• Follow driver installation wizard.
• Plug back printer when prompted from installation wizard.

Note:some printer does not work on Vista, if you do not find any driver download for Vista on your model page, that means your model is not Vista compatible.

Here is the link :
Epson Stylus C46 : Drivers & Software
Unplug printer USB before starting driver installation.

Note : Vista drivers are not available for this printer.

Just download the driver from epson.com.

http://esupport.epson-europe.com/FileDetails.aspx?lng=en-GB&data=dkmEK02SU002FeqezvADVcUCMUScytorSqtFyvt3CKsyMfwU003D&id=317967

 

try that...its PIF...if you download it, its .exe

 

good luck!

Wrong drivers or not compatable it sound like. Did you install with mac disc. Check. If not the issue,Go to manufacturers web site, and look for driver downoad area. See if you can download a more updated driver that may be compatable with your mac. Good luck. Most printers come with a windows disc and a mac disk.