Getting disc read error - Alpine CDA-7894 CD Player

Hello frnd,

Please explain your problem completely. like, when u insert disc, what error you get. Does your player show any error or just eject the disc.

Djajay

[email protected]

time for a new reader only around 15 pound or 28 or so dollors on ebay and see you tube on how to replace drive its not to hard to do

Disc Read Error is mainly due to worn-out,dirty lens and it can also appear because of the disc that you have inserted in your PS2......
Try following to get rid of DISC READ ERROR:

• Clean your PS2 lens:

Watch this video first


This will help you in cleaning the lens.You can also clean your PS2 lens by some lens cleaning DISC.Make sure not to touch lens with your hand.

• Clean your DISC:

Watch this one to clean your DISC


Thank you!!!

how many times have you tried to play the disc?
the 360 is prone to many disc read errors, and most of the time if you just keep trying to play the disc it will work. xbox recognized the problem, and with the new dashboard update you can install games to your hard drive which minimizes the time the disk is spinning, which in turn minimizes disk read errors.

if it doesn't play, I would deffinetly try getting a new copy before sending in the console. getting a new copy is just a trip to the store, sending in the console will take a month.

you will have to take it to someone who fixes ps2

don't

You said the model is 77001?? is that the slim type ps2?? if it is try this troubleshooting step

if the console is lying down flat where the disc lid is at the right side, try applying pressure on the lower right corner of the lid, sometimes the lid's safety button gets worn out and it will give you disc read error if this solves the problem then the button really is busted, if you have technical background you try and change the button

if you bought it from wal-mart, you might have to get it fixed because wal-mart usually throws their merchandise into their truck. I mean they THROW it and dont care.

toc error means "table of contents" error... means the player is unable to read the disc at all. May have a dirty focal lense to laser. clean gently with some windex on a cotton wool bud. It may be a faulty spindle motor that spins the disc. the bearings get worn or uneven and do not allow for disc reading to be successful. a check for this is a drop of oil to the bearing. It may then start to read discs, but will still require the motor to be replaced. . Check for the above... but if there is more required, take it to a Kenwood 'Agent... it may need a laser change

I had the same problem, I take it you have a modded wii(chipped), if you use a backup disc it is of a lower quality then original discs, the wii gets read errors without you noticing and tries to read those disc areas again sometimes suceeding and the gaming goes on, sometimes it fails, and a disc read error occurs. Over time the dvd assembly will take some damage it will loose it rigidity it once had and the wii stops reading discs. The problem gets worse if you have standing up, so first thing si to flip it down and try. Otherwise you (or someone you trust) will have to open the wii and adjust the lens sled so it wont flap as much up and down. Hope this helps..