Generic Digital Web Camera Driver

no more generic device drivers from microsoft unless its motherboard devices. also note that the new operating system makes it so that you have to have "signed drivers" or the windows 7 will refuse to install the drivers! the device drivers would still be on your other computer if you could get to them of if the computer was working.
however, a good computer geek might able to pull the drivers from your old hard disk drive. but by then the cost might be cheaper to buy another camera instead. you would the maker of the camera name for device driver search.

If the web camera came with an installation disk, use the disk to install drivers then plug the web camera in a USB port. The computer should recognize it. If it is properly recognized it will work with all applications that support a webcam (Skype, MSN, Google chat..) If it is not recognized and you do not have an installation software, you should go to the manufacturers web site to download appropriate drivers.

Try to insert it to the computer. If the name appears like "HP Invert USB Web Cam", download the driver and software at divxturka.net or downarchive.com

webcams are not generic, they require a particular driver from the manufacturer (which should have been supplied with the webcam).
If you can read off the webcam its  type or name you can search for the appropriate driver on the internet.

hi,
the most common reason for this is that the driver is not installed. click here to download the driver(the driver is generic so can be used for all models).
cheers

i lost my offspring web cam drive and i want to download it for free

Copy this site and paste it in your web browser address bar

http://www.download32.com/webcam-diagnostics-d35065.html

to download the Camera Diagnostic Tool and run it to check out your camera and/or problem.
Be sure the camera is plugged into the USB port before running the program.
As you run the program, write down the info about the camera so you will know what kind and manufactured camera you have
attached so you can get the proper software drivers for it.
Hope this helps. Bud

how i can download creative pd 1100 web cam drivers pls give to solution

If the Web cam was Generic, or even Brand name, and it came with a Drivers disc (this would mean that it is not plug and play), try completely uninstalling the Driver software for the web cam. After the uninstall has finished, reinstall the drivers, taking extra care to follow ALL on screen instructions to the T. If at some point there were other web cams, and the drivers that belonged to those cams installed on the computer, be sure to fully uninstall all of them. Only use the cam and the drivers that you are attempting to install. After all of that, the cam should work just fine.

If for some reason the cam does not work after reinstalling the drivers, try a different brand of web cam. The computer that the drivers are attempting to operate on may not be adequate to support those drivers. If that's the case, try a generic, cheaper web cam as I said.

Also: While powering up the cam, don't run anything unnecessary.

Hope this helps.

lost installer driver- star-eye web camera, model PWC-30A