Question about Samsung HT-DS610 System
Have you every gotten an answer for your problem with Samsung Home Theater HT-DS610. I am experiencing the same problem whenever I turn on my DVD player it will say DVD/CD but then it will say Protection and turn off.
Protect mode will kicking whenever a fault is detected.
Causes that can start protect mode are:
Electrostatic harges on internal circuits.
Leave the unit unplugged for power for one hour or so, this will allow discharge.
Bad speaker wiring.
Check speaker wiring, try unplugging and plugging back, or start after removing one speaker at the time.
Internal fault is the natural cause for protect mode. If all the above did not work, then the problem is a blown component or an internal fault. In this case the unit must be taken apart , tested and repaired by an experienced person.
If the unit is less than one year old, or if you want to get service, call Sony at the phone number listed on the product documentation.
Posted on May 04, 2009
Tips for a great answer:
Feb 02, 2011 | Samsung HT-DS610 System
Dec 24, 2010 | Samsung HT-DS610 System
Nov 20, 2010 | Samsung HT-DS610 System
Nov 06, 2009 | Samsung HT-DS610 System
Sep 25, 2009 | Samsung HT-DS610 System
Mar 21, 2009 | Samsung HT-DS610 System
Aug 06, 2008 | Samsung HT-DS610 System
Nov 25, 2007 | Samsung HT-DS610 System
1,635 people viewed this question
Usually answered in minutes!