How can you check the number of copies produced in Sharp photocopier AR-5516s

check the corona wire in the drum unit

check the density settings

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

If you have the install disc , Go into remove programs and uninstall it . then reinstall it . up date as there may be a new driver for it.

H5-01 means repeated paper jams on the Sharp photocopiers.
Once the paper jam is cleared properly, you need to clear the error condition.
Put it in 'Copy' mode
Press on the keypad:
P * C * 14
Click execute and press 'Yes'
Then press the 'Copy' tab.
This will reset the menu and jam condition.

Thermistor open detection

thermistor open ditection

F2 fault code

fuser problem /enter simulation # 14

Try this link but you need to know your OS first

Open side, look at black assembly on the door, there is either a black spongy roller there or two wires in a black assembly,

1- wires may be broken resulting in blank copies
2- roller out of place
3- HVT (high voltage transformer) not working