At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Accessories i have been looking for a car charger for my f20 but no luck so far does anybody know if there is any available? Genuine or after market doesn't matter.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
garmin navs are famous for there chargers burning out. first check the fuse at the end of the 12v car charger by unscrewing the tip of.if its blown replace it. if its not blown then the charger has burned out there are after market chargers but only garmin chargers will work!! as garmin use a sensor to detect the correct type of charger is connected so be sure to buy a genuine garmin 12v charger
best of luck please take the time to rate this repair.thanks
TOOK THE CAR TO BOSCH DEALER AND RUN A FEW TESTS ONLY TO FIND THAT THE AFTER MARKET CARB AND BASE PLATE DID NOT WORK AS GOOD AS GENUINE VW PARTS.AFTER MARKET CARB HAS 2 VACUMS AS GENUINE VW HAS 1 AND THE AFTER MARKET BASE PLATE IS MORE FLEXABLE THAN GENUINE.I INSTALLED GENUINE VW PARTS NOW AND IT SEEMS MY PROBLEM IS SOLVED FOR NOW.
Your Navman will not run in car unless the output on the charger is 1000ma or 1a. you need to buy a genuine charger, motorola phone chargers do not have the output to run the unit
I have had this problem from time to time with my F20 which I have had since May 2007. The simple solution is to turn it off and then on again and let it go through it's start up sequence. It is far better for this to be done whilst stationary.
×