How can I unlock my router? I forgot the password for my wifi conection.

Some routers have a sticker or label on the back. The WiFi password is usually there.

The default passcode (WEP etc...) is usually on the router. Hopefully he didn't change it.

Hi there, you can reset your wifi device by holding Down something on the litle whole on the site, and if you tell me wich model i can tell you more about resetting

If you check your own wifi password than go to wifi setting and click Show characters check box but if you are using router and forgot your wifi router than try to reset your router wifi password. If you need any technical guidance than follow Mac Technical Support .

Many routers have a sticker on their belly with the default password.
Newer routers often have a reset switch to restore default settings.
(needs to be held down for 10-15 seconds). Most router makers host support websites; look up by model#. Good luck!

router passwords are usually on the bottom of the router. sometimes it is the serial number. if that doesn't help, then if your router is unlocked, you can log into it and find the wifi password in the wireless security section. if your router was supplied by your internet provider, they will often have a copy of it, or can get it for you.

You can always use the reset in the back, but that will clear all custom settings. Hold it in till it cycles. Defaults to web admin can be looked up at Port Forward dot com.

Is there any computer online using the router.
If yes then you can open the router set up page on that computer.
router set up page is the page where you can check all the router settings.

Click Here for more information about the routers and network

To find the password/passphrase on the Linksys router, connect a PC to one of it's Ethernet ports, load a web browser, and go to the URL http://192.168.1.1/. This will take you to a popup box which asks you to enter a username and password to login to your router. On older models the username is left blank and the password is “admin”. On newer models, both the username and password is “admin”.

Once you get in to the router management tool, look for the security portion. There you will find the password or passphrase you are using for your WEP or WPA security encryption.