The ready light is flashing green then amber. What does this mean

go to dell website and see what those lights are meaning, I can't help with no exact brand and model (Dell - model ....)

A red light indicates the charger is charging the battery, an amber light means it has switched from fast rate charging to trickle to keep the battery topped off, and green would mean the battery is completely charged. But don't be fooled waiting for green, many times the charger will only be on green for a moment before changing to amber and keeping the battery topped off.

Flashing can be a sign of a problem on some chargers.

A rapid flashing red can on some chargers indicate a bad or shorted battery, or a bad battery contact in the charger itself. If in question, try a different battery on the charger or compare with another charger to determine if the blinking is normal.

Best regards.

Hello, you can download the manual here: http://www.plantronics.com/us/media/media-resources/literature/user_guides/73156-01_CS55_US_DL.pdf?WT.dl=20 It says that a flashing amber light means charging, a solid amber light means charged, a solid red light means power, a solid green light means talking, and a blinking green light means muted.

when i turn the printer on the light flashes amber several times, then green then repeats flashing amber, and back to green etc. turning it off and back on made no difference. last time it worked normally after being off for a couple of days, but now it is doing that again.

Amber light flashes 7 times, then green for a couple of seconds, then amber 7 times etc.

4 blinks of the amber light says that the ink is empty, at least 1 cartridge is empty.

I believe that 7 amber flashes refer to a cartridge error. Check that the cartridge is seated correctly.

if it turns green that means that it is charged, but it then if it turns amber that means that it is going bad

thanks
hope this works for you

Green is steady or ready and amber light is activity remove the usb cable and plug it again

From the OKI site, I found this information. My problem is a Flash 2 Blink, which is a problem with the cover or minor error, whatever that means. I can't figure out how to fix it. Any suggestions greatly appreciated!

Flash type Ready LED (Green) Manual feed LED (Amber) Error LED (Amber) Meaning Flash 1 -- slow blink X The printer is processing data when printing has been suspended. X The image drum required changing or toner is low. Flash 2 -- blink X The printer is receiving and processing data during printing or the printer is resetting itself. X The printer is requesting manual paper feed. X There is a printing error, problem with paper or a cover open. X X X There is a minor error with the printer. Flash 3 -- rapid blink X X X There is a major error with the printer.

Green:Fully charged
Amber:Improper connection
Red:Charging