An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: RCA P52937 52 in. Rear Projection Television
Remove the speaker grille. then there should be a few screws running along the bottom of the screen frame. after removing those screws slide the entire fram up to release the hooks that hold the screen frame to the cabinet. Be careful and unhook the wire clip from the front control panel once the screen frame is loose before you stretch the wires.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
hello my name is rico i work on tvs sometimes. you need to remove trhe screws around the back of screen and the front of the tv, need to remove front panel screws around. please feel free call me if you needd more help with this problem. my phone number is 602-810-7149
I have a P46921 46 in rear projection television. I brought it in and they told me it was the processor board (main control board with programming) that wasn't letting the TV turn on and was quite an expensive repair. I now have the parts back and was wondering if someone could use them. I know that some people were looking for the actual screen found behind the plexiglass or what looks like plexiglass. I have all the parts and was told that it worked beautifully until it decided it wouldn't turn on again. Anyone interested, please drop me an email at [email protected].
pop the speaker grill off, then take out the 1/4 inch screws and remove the screen, if it's behind the screen, simply brust it away, if it's between the 2 screens, then you must take them apart and remove the body. also while your in there, clean the lenses and mirror with some windex, this will greatly improve your picture.
Take the screws out of the BACK top panal of tv! be gentle the mirror is connected to this back!.... now after removeing back you will see the inside of screen and the three lenses and on back panel the mirror! clean all three of these and you will see a big change for the better..Then just replace back! (The screen itself does not come out!)
Please take a second to place a rating for my answer!
my tv repair man said use a blackboard eraser and rub it on screen vertically - that is up & down only. He said to use no chemicals or cleaners, or you'll ruin it. He had a customer that had a child draw on it with crayons-he told her to leave it there because it's better than destroying the screen.
i do not know what happened to my RCA model # M50WH72S
i woke up and went to turn it on and the power was already on and the screen is black and no sound. and the television wont turn off with remote or from front of t.v i have to unplug it. same thing once i plug it back in the t.v power button is on and no picture or sound and wont turn off does anyone know if i need to replace a part ? and where i could find it i dont wanna pay a lot to have someone look at it. i checked the bulb and its in good shape. please help.