How do I use camara card to up load photos from camara to pc

First use the Copy command as described on page 64 of the manual at http://www.general-imaging.com/uploadedFiles/40_Support/User_Manuals/J1456W/j1456w-usermanual-eng.pdf to copy the pictures from the camera's internal memory to a memory card. Then take the memory card from the camera and put it into a card reader attached to your computer. Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa ( http://picasa.google.com ).

Consider NOT attaching your camera to your computer.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program.

I would take the memory card out of the camera and plug it into your computer and see if you can download them to your pc without using the camera at all... If the pix are really important take the sd card to a photo shop and have them burn the photos to a cd... hope this helps

this problem & restart problem is very common for 3110c,temperorily it can be fixed by changing the memory in use ,but for permanent fixing format the memory card ,if continuous with ame format the cell,hopefully formating the memory card will solve the problem

Hi there.
The camera is asking you to format the camera card.
If you have any pictures you want on the card, connect it to a PC and transfer the data from it, then put it back in the camera and do what it asks you too do.


Thanks for choosing FixYa!!

Try NOT connecting your camera to your computer.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Windows Photo Gallery or Picasa.

Basically picture files in memory card have corrupt data that's why computer doesn't recognize it.
HP recommends following action...
Close the HP Image Zone or HP Photosmart Software, disconnect the camera from the computer, and reset the camera. (can see this at HP Support)
2nd option is to find some memory card data recovery software on internet and use it to correct data files in memory card.
Thank you.

upload into ur pc and delete from tat

Is your memory card locked? It won't let you delete pictures if it is. Check the little switch on the side of the memory card and move it in the opposite direction and then see what happens. Good Luck.

If you download the photos that are on the internal memory to your computer, the next time you take photos it should go to the memory card that is loaded. It worked for me, so I hope that helps