At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
We have a 52"rca rear projection tv. It was working fine and the picture went out and there was smoke came from the back. could the problem be the projection lamp? if not what could it be?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
WHAT ISTHAT WHEN MY TV MAKE NOISES THEN STOP FOR AMINUTE ONCE THE PICTURE IS THER THEN 10 MINUTES IS CUTOFF LIKE ITS TRYING TO COME BACK ON WITH THE SAME NOISES
UNPLUG UR TV FIRST go to the back of ur tv on the right there should be a panal that has three screws or more this is were the power switch board is . remove it and check that there's no black marking's on it if there is that the problem
email - [email protected]
I had the same problem. I went to the complaints board and found Elaine!! This wonderful woman is definatley my hero!! Just take the back off the tv, and with a blow dryer, blow all the dust off!! Wahla!! Magic, the tv works just fine, and you have no tv repair man to spend all your hard earned money on!! Thank you again Elaine!!
You have bad convergence IC's.. If your not experienced in troubleshooting electronics or soldering, you should have a trained tech take a gander at the set. Its not worth risking life and limb to save a few bucks, Good Luck
×