Remote control codes

Hisense remote control have no set-up codes with LG DVD player.
If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order. Pull up older posts. Surf the site with patience.
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

All players can be muti zone all you need to do is unlock the region code menu. This can be achieved by pressing a number of keys on the remote. Now all you need to do is find the combination! Try entering the model number into google and the words "region code". Somebody will have hacked it!. When you get it enter 0 (zero) for the region.

Panasonic DMRs cannot be unlocked for muliti region simply by entering a code form the normal remote or front panle controls.

Panasonic machines require a special remote control in order to make them multi region. Panasonic dealers will unlock your machine for you but will charge you - this is expensive.

Alternatively, if you search eBay you will find devices that will unlock your machine that can be purchased or "rented", for considerably less than a dealer will charge.

1) Turn on the player with no disc in the tray
2) Press the Open/Close button to open the tray
3) Press the info button, the firmware version shows up (
4) After the version info disappears, close the tray again by pressing the Open/Close button
5) At this point, it will show "no disc" at the top. Press the Info button again, and this will disappear. If the "no disc" does not disappear then try again by using the REPEAT button 
6) Now type the code that applies for your region (R2 is 57538). A '2' will briefly show up at the top left corner
7) Now press 9, and 9 will show up in the top left corner
8) Power off the player, and turn it on again. You'll have a multi region player

I've found the following codes at the 1080P7 hack:
R1 - 29334
R2 - 57538
R3 - 56732
R4 - 76884
R5 - 53814
R6 - 24462
This worked on my dvd1080p9 R2 DVD player

This is a code for other models but it works on about half a doz Tosh models.
It may work, i cant test it out for you so, its up to you if you want to try it will either work or not.

1. Press the Open button on your remote control to open the drive tray 2. Press the 2 button on your remote control 3. Press the 4 button on your remote control 4. Press the 0 button on your remote control 5. Press the 3 button on your remote control 6. Press the 9 button on your remote control 7. Press the 6 button on your remote control 8. Press the 0 button on your remote control 9. Press the Enter button on your remote control to change the region to 1 for region 1, 2 for region 2, and so on, or 9 for multi-region playback 10. Press the Open button on your remote control to close the drive tray 11. Power off the DVD player 12. Power on the DVD player

Heres the code for the bush. don't know about the other one though.

To convert this player to multi-region
1. Power off your DVD player
2. Power on your DVD player
3. Press the Open button on your remote control to open the drive tray
4. Press the 1 button on your remote control
5. Press the 0 button on your remote control
6. Press the 3 button on your remote control
7. Press the 0 button on your remote control
8. Press the 0 button on your remote control for multi-region playback
9. The onscreen display will indicate the currently selected region
10. Power off your DVD player
11. Power on your DVD player

1...press the open button on remote control and open tray
2...press 2 button on remote control
3...press the 8 button on remote control
4...press the 1 button on remote control
5...press the 2 button on remote control
6...use arrow keys on remote to highlight current region number
7...press OK on remote to select region 1 for region 1then 2 for region 2 and so on,or 9 for multi region
8...press the i button on remote control
9... all done ,now its multi region

1. Press the Menu button on your remote control
2. Press the 5 button on your remote control
3. Press the 7 button on your remote control
4. Press the 5 button on your remote control
5. Press the 3 button on your remote control
6. Press the 8 button on your remote control
7. The currently selected region will be indicated on the TV.
8. Press the 1 button on your remote control for region 1, the 2 button for region 2, and so on, or the 9 button for multi-region playback
9. Press the Menu button on your remote control
10. Press the Menu button on your remote control

Tested with Region 1 DVD's on my UK player (Region 2 bought from Comet)

hi give this ago works fine on us or uk


1. Press the Menu button on your remote control
2. Press the 5 button on your remote control
3. Press the 7 button on your remote control
4. Press the 5 button on your remote control
5. Press the 3 button on your remote control
6. Press the 8 button on your remote control
7. The currently selected region will be indicated on the onscreen display
8. Press the 1 button on your remote control for region 1, the 2 button for region 2, and so on, or the 9 button for multi-region playback
9. Press the Menu button on your remote control
10. Press the Menu button on your remote control

Tested and Worked on my UK player (Region 2).
also works on r136 and r150