Need fax confirmation

http://siica.sharpusa.com/product-downloads

try this

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Hi Dear

HP LaserJet 3050, 3055, 3390, 3392 AiO Product - How to Print a FAX Confirmation Report Description By default, a Fax Confirmation report (Fax Call Report) will only print when a fax error occurs. However, this option can be changed using the printer control panel.

1. Press the right arrow until Reports appears in the display, press the checkmark.
2. Press the right arrow until Fax Call Report appears in the display, press the checkmark.
3. Press the right arrow until Print Report appears in the display, press the checkmark.
4. Right arrow to the option of choice, press the checkmark to save the change.

FAX call report options

• Send Fax Only - a confirmation sheet will only print when a fax is sent
• Never - no fax confirmation sheets
• Every Error - default setting
• Send Error - a fax confirmation prints when the fax transmission encounters an error
• Every Fax - a fax confirmation sheet will print for incoming

enable the rx report! thats all.........

I would first test a fax to see if it completes on your end then is received on it's entirety on the receiving end. Then print a fax transmittal report to confirm. Once that shows success, print your polling fax report and verify.

If it says zero pages sent, chances are the fax failed.

Try this:

Press the Setup button (it might be the sign of a monkey range)

1. Press the Down arrow ( ) to highlight Print Report , then press OK .
2. Press the Down arrow ( ) to highlight Fax Confirmation , then press OK .
3. Press the Down arrow ( ) to select one of the following options in the table below, then press OK

On Fax Send Prints a fax confirmation report for every fax you send. On Fax Receive Prints a fax confirmation report for every fax you receive. Send and Receive Prints a fax confirmation report for every fax you send and receive. Off Does not print a fax confirmation report when you send and receive faxes successfully. This is the default setting.

Select the one you would like to choose ;
For further help click on the following Link:

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01083680&cc=us&lc=en&dlc=en&product=3204785

Regards Soumajit

i believe it means rx receive and tx transmitt


in rs 232 communication (serial communication modem fax etc) line 2 is tx (transmitt and 3 is receive rx hope that helps

Press

Function
74
set
12
set
2
set
stop

first print out the help sheet, might be in reports then u have all the information at hand

By default, a Fax Confirmation report (Fax Call Report) will only print when a fax error occurs. However, this option can be changed using the printer control panel.

1. Press the right arrow until Reports appears in the display, press the checkmark.
2. Press the right arrow until Fax Call Report appears in the display, press the checkmark.
3. Press the right arrow until Print Report appears in the display, press the checkmark.
4. Right arrow to the option of choice, press the checkmark to save the change.

FAX call report options

• Send Fax Only - a confirmation sheet will only print when a fax is sent
• Never - no fax confirmation sheets
• Every Error - default setting
• Send Error - a fax confirmation prints when the fax transmission encounters an error
• Every Fax - a fax confirmation sheet will print for incoming and outgoing faxes
• If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
  Thanks, Joe
  

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

when i fax there is no confirmation sheet that prints..........help!!!!