Question about Sony KP-51HW40 51" Rear Projection Television

1 Answer

Sony KP-51HW40 Convergence issue

I am interested in either buying a board from you with detailed instructions on how to do the replacement (Is soldering involved?) or sending my board to you to fix. The last response mentioned a link but did not have one. if you can correspond directly email me at treyking at gmail dot com.

Thanks

Posted by Treyking on

Ad

1 Answer

Sonny Berry

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sony Master
  • 8,617 Answers

Sorry about that heres the link. No installing the board will not involve soldering if you decide to go that route.
http://servicemanuals.vstore.ca/

Posted on Apr 10, 2008

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Sony KP-53XBR45 i have a bad convergence board. Do I fix it or replace it. Where is the part available

Hi,
Replace convergence out ICs to get it fixed.
You can replace these chips if you can replace parts in circuit board with proper tools or ask local tv tech.
Required ICs are available with Part Store.
Thanks.

0helpful
2answers

Blue Shadows

you can get the SONY type 1 convergence repair kit which will usually repair that issue. The kit contains the parts plus instructions on CD. You can get the Kit at the following link.
http://www.tvrepairworld.com/
0helpful
1answer

My colors wont stay converged

put a convergence repair kit in the set that will usually repair the Issue. You can get the Sony convergence repair kit which works with your model at the following link. The kits contain the replacement parts and complete instructions www.tvrepairkits.net
0helpful
1answer

Convergence issues on Sony KP-51HW40

you cant realign them they are factory set so you would need to replace them if the colors are out of line or you cant reset it manually. the tube are preset and not meant to be redajusted
0helpful
1answer

Sony kp 51hw40 real projection tv

Below is exploded view of your Sony KP-51HW40 TV rear side which shows board names and location.
You need to check D Board for convergence ICs and these are marked as IC8001 & IC8002 on circuit board.

097a23d.jpg
0helpful
1answer

KP-51HW40 Convergence Problem

actually your model should only need two STK392-560 Convergence ICs and six 3.5 amp pico fuses. You can get the replacement ICs and pico fuses at the following link with free installation instructions. Heres the link.
http://servicemanuals.vstore.ca/
3helpful
1answer

Sony KP-51HW40 Convergence issue

First if the auto convergence isnt working you need new Ics . two of them.I am part owner of a site that sells the ICs and provide free tech support by way of online instant messaging and we include detailed instructions on how to do the repair yourself. We also have a service where you can send your board to us and we will install new ICs and all new Convergence resistors and ship the board back to you. Or we sell remanufactured boards. I would recomend replacing the two ICs as that would be the cheapest rout the ICs arent exspensive , but will require de-soldering and soldering in the new ones. Here is alink to the site. You can go and send them a request for information by clicking on the contact us link in the lower left info box. Someone will get back with you quickly just leave your model number and what you would like info on.
0helpful
1answer

Sony KP-51HW40 Convergence issue

Can you adjust the convergence by the convergence menu without going through the service menu? The settings through the convergence menu should save automatically. Have you replaced the convergence ICs? If so the settings should save, if not the D board will need to be replaced or at the very least rebuilt. Let me know if you need further assistance with this issue.
0helpful
2answers

Intermittently convergence problem.

Try resoldering both convergence ICs located on the D board if that doesnt correct the problem you will need to replace both ICs let me know if I can assist you further.
Not finding what you are looking for?
Sony KP-51HW40 51" Rear Projection Television Logo

Related Topics:

42 views

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76804 Answers

Ekse

Level 3 Expert

13435 Answers

Nasir Muhammad
Nasir Muhammad

Level 2 Expert

252 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...