Kodak EasyShare Z650 Digital Camera Logo

Related Topics:

Question about Kodak EasyShare Z650 Digital Camera

1 Answer

Kodak Z650 mode button not changing settings

Currently when I turn on the camera it may be set to 'auto' but the camera says it is in 'sport' mode. Other positions of the mode button do not always change the setting or the setting is like one position off - in sport even though set to auto. Are the contacts bad ? Is it possible to open up the camera and clean the contacts on the mode switch (and eye/lcd switch) ?

Posted by lunkker on


1 Answer


  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 101 Answers

Don't ever open the cam its very difficult to close it !!
he he...(i have experience)
so just take it to the nearest service center and get its switch changed !

Posted on Apr 10, 2008


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


Kodak z650 comes on fine but doesn't stay on-funny noise before it cuts off

Hello Donna, You camera is suffering from age, needs to be repaired or time to replace it. Sorry.

I have an auto flash, but it's not flashing. Do I need to somehow turn this function on? If so, where is it?


Follow below mentioned steps to turn flash on:-
  • Rotate MODE DIAL to any one of them Auto, program, portrait, landscape, sport or night mode.
  • Press POWER button to turn power ON.
  • Press Navigation button (left arrow button), Flash mode change each time button is pressed. you can use UP and Down Arrow button to change settings. Set it to FLASH ON.
  • Press OK to confirm settings.

4 thumbs rating keep us motivated to answer more free questions.

Flash does not work on Kodak z650. no damage history. What can be done?I'm fairly adept at mechanical stuff.

To correct the flash problem, please do the following:
Turn off the camera.
Install a set of new or fully charged batteries into the camera.
Turn on the camera.
Press the Flash Status button to scroll through the flash options until Fill Flash (the lightning bolt icon alone, with no other letter or symbol) is displayed. This forces the camera to use the flash.

if problem still persist contact the tech num 18002356325

Hope this will help


Using timer

Kodak EasyShare C613

Changing picture-taking settings
You can change settings to get the best results from your camera.
1Press the Menu button.
2Press to highlight a setting, then press OK.
3Choose an option, then press OK.
■Press the Menu button to exit the menu.
NOTE: To better understand each menu option, use camera Help. Highlight a menu choice, then press the button. Some settings remain until you change them; others, until you change modes or turn off the camera. Some modes offer limited settings.Press Menu, , and OK to access settings
10 seconds (default)—
so you have time to get into the scene.
2 seconds—
for a steady, auto-shutter release on a tripod.
one picture is taken after a 10-second delay. A second picture is taken 8 seconds later.
Exposure Compensation
Increase or decrease brightness before taking a picture. (Also see page 27.)
0.0, -0.5, -1.0, -1.5, -2.0, +0.5, +1.0, +1.5, +2.0

From: http://www.kodak.com/global/plugins/acrobat/en/service/manuals/urg00711/C613_UG_GLB_en.pdf

If this helps, please post a rating for me. Thanks!


Kodak M1033 does not recognize memory card

  1. Turn camera on
  2. Push the options/settings button (the button next to the view/playback button)
  3. On the Capture Screen move over to "Setup"
  4. Move down to "Image Storage" and make sure its set to "Auto" {if not select it and set it to Auto}
  5. If already set to Auto, change to Internal Memory.
  6. Power off and power back on then follow steps 1-4 to set back to Auto.
If this still doesn't work, backup pictures from internal memory to computer then delete all pictures on internal memery. Camera should automatically prompt you to change to memory card.

Sound when take a picture

sometimes the settings on your camera will change itself... kinda like when you have to fix the date and time??? you can always go into your settings and change the sound to a diffrent one, or turn the sound off...

Kodak Z650

I have one and my does not shut down right after I turn it on, but there is a battery save feature on it, You must have yours set to save the most battery... see if you can reset your save battery feature..
Hope this helps

Z650 picture quality

try reformating your card and see if that helps any.

Setting language and date

Try the following: 1 In any mode, press the Menu button. 2 Press up & down arrow keys to highlight Setup (the spanner sign), then press the OK button. 3 Press up & down arrow keys to highlight the setting you wish to change, then press the OK button. 4 Choose an option, then press the OK button. 5 Press the Menu button to exit. Please update the question & let us know if the information given was useful to you - Good Luck!

Pics not recognized by computer

I had the same problem. Is there a Memory card in? If there is one it probably is corupted. Happend to me. If it isn't try taking it out and puting it in the port on your machine.
Not finding what you are looking for?


Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

David Shaub

Level 3 Expert

2994 Answers


Level 3 Expert

85240 Answers

Cindy Wells

Level 3 Expert

6553 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides