Question about Sony SDM M81 18.1" LCD Monitor

3 Answers

Lost power supply

Locking for power supply to order

Posted by loc nguyen on

  • thomasart27 Dec 23, 2008

    i,v lost my power lead for sony sdm-m81 fs monitor any idea,s

×

Ad

3 Answers

Power Payless

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 25 Answers

Yes, lcdpayless.com has this kind special power adapter. You can just search it by model# SDM-M81 at the homepage.
or just click as below link and check it out.

http://lcdpayless.com/productpage.php?productId=4125

Posted on Sep 23, 2009

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 17 Answers

Do not buy anything from LCDPayless. They are crooks. I order power supply for Protron 32". Their web page showed the same model as mine and they sent me some garbage that was not working. I returned it and they refused to reimburse me full amount. I contacted my credit card company and then they claimed they didn't receive it at all. STAY AWAY FROM THEM THEY ARE THIEVES.

Posted on Feb 14, 2010

Ad

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 298 Answers

Hi,

There are 2 parts to the power supply assembly. You will need both unless you only lost 1 piece of it. Please see the links below for the A/C Adapter (plugs from unit to A/C cord) and A/C Power Supply Cord (plugs from A/C Adapter to wall socket)

Sony SDM M81 A/C Adapter
Sony SDM M81 A/C Power Supply Cord

Posted on Apr 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2009 malibu door lock relay located


I suggest you get one of those manuals
from www.reliable-store.com they can help you in this

Mar 08, 2018 | Cars & Trucks

1 Answer

I have an 06 Buick Lucerne rear courtesy lights do not work front courtesy lights work fine?


The BCM receives battery voltage from the CTSY/RF TRN fuse in order to supply power to the courtesy lamps. The BCM applies this voltage to the courtesy lamps through the courtesy lamp supply voltage circuits. When any door is opened, the door open switch contacts close and the BCM receives a door-open signal. If the BCM receives a door lock or unlock signal, the BCM will activate the courtesy lamp supply voltage circuit, providing battery voltage to the dome lamps and the left and right footwell courtesy lamps. The courtesy lamps can be manually activated by placing the interior lamp switch in the DOME position. For more detailed information concerning courtesy lamp operation refer to Interior Lighting Systems Description and Operation.
The BCM receives battery voltage from the INT LAMPS fuse in order to supply power to the inadvertent courtesy lamps. Inadvertent power courtesy lamp feature provides a similar function for the interior lamps as a retained accessory power feature. The BCM will energize the courtesy lamps supply voltage circuit when the BCM is in the active state (awake). When the inadvertent power courtesy lamps supply voltage circuit is energized, it supplies voltage to all the interior lights listed below. The BCM will continue to supply voltage to the interior lamps after the ignition is turned OFF so that the interior lamps may be operated.

Feb 15, 2018 | Buick Cars & Trucks

2 Answers

I have a 2000 chevy s10 2wd. Where is the relay switch to my drivers side window. The window switch is and the motor is good. But cant find the relay switch to check it and see if it's bad.


Sorry but there is no relay switch ! Go to www.bbbind.com free wiring diagrams .Check it out ! Your regulator is probably bad ! Is there B+ voltage at the switch , at the motor ?
Left Front Window Switch Operation
Place the ignition switch in the RUN position in order to supply battery voltage to the left front door lock and side window switch through the POWER WINDOW circuit breaker and the CKT 1001 (DK GRN). Press the left front window UP switch in order to supply battery voltage to the left front side window regulator motor through CKT 164 (DK BLU). The window motor is grounded through CKT 165 (BRN) and the window switch DOWN contact.
The regulator motor runs to drive the window to the UP position. Press the DOWN window switch in order to provide battery voltage to the window regulator motor in the opposite direction through CKT 165 (BRN). The window regulator motor is grounded through the CKT 164 (DK BLU) and the window switch UP contact. The motor runs in order to drive the window down.

Aug 22, 2016 | Cars & Trucks

2 Answers

Why won't the passenger door unlock?


Door Lock System Controls
The Power Door Lock System is controlled by the body control module (BCM) and can be activated by any one of the following:
?€¢
A door lock switch lock or unlock actuation

?€¢
A keyless entry transmitter actuation

?€¢
An automatic door lock or unlock actuation

?€¢
A last door closed locking (LDCL) actuation
If the driver door cylinder switch feature of the vehicle is functional, the locks may also be operated by a driver door cylinder switch lock or unlock activation.
Power Door Lock Switch Operation
Each door lock switch is wired to the body control module (BCM) through a separate door lock/unlock signal circuit. While these circuits are separated between the BCM and respective door lock switch, they are connected into a single circuit within the BCM. The BCM supplies voltage through the door lock/unlock signal circuits to each door lock switch. When either door lock switch is operated, this supply voltage is pulled to ground, providing the BCM with the required lock or unlock signal. In order for the BCM to distinguish between a lock and unlock signal, the lock switch contains two separate paths for this voltage to flow to the same body ground. When the switch is operated to the unlock position, the supply voltage flows to ground through a 1.5 K?© resistor. When the switch is operated to the lock position, the supply voltage flows to ground through a different part of the switch circuit, which has no resistor. The BCM then interprets the flow of voltage as a lock or unlock request and powers the door lock actuators to the appropriate lock or unlock position.
I'll post a youtube video on how to test the power door locks computer controlled , check it out ! Your problem could be a switch or the lock actuator , BCM , wiring etc.... you need to test it to see !
I'll
How to test computer controlled door locks

Mar 22, 2014 | 2008 Saturn Aura

1 Answer

Cpu fan noisy in scaleo p


You can order and replace the noisy fan.
It is not difficult to do and requires minimum tools.
Just be sure any dust or debris is removed from heat sink fins, power supply and air vents in the case. Check clearance and dimensions before purchasing the new fan. Just like Goldie locks you want it Just right. Not to big and not too small.
If you blowing the Power supply out with compressed air. (always a dust magnet) Be sure to hold the power supply fan with a wooden dowel or anything to prevent blades from spinning. Be sure to do all this with the power off and unplugged. Compressed air can over rev the power supply fan and damage the bearings. (you'll have another noisy fan within a short time if you don't.)
Good luck hope this helps!

Mar 10, 2014 | Fujitsu Siemens Computers & Internet

1 Answer

I replaced the power lock switch on the driver side of my chevy malibu because the locks were locking and unlocking by themselves, I also heard a beep under the dash. The problem was taken care of. Now...


All the lock's ,were locking an unlocking or just the driver door lock ? Probably wasn't the switch ,more likely a bad input to the BCM . The door lock's are computer controlled .
Do you know what a BCM is ? body control module .
Each door lock switch is wired to the body control module (BCM) through a separate door lock/unlock signal circuit. While these circuits are separated between the BCM and respective door lock switch, they are connected into a single circuit within the BCM. The BCM supplies voltage through the door lock/unlock signal circuits to each door lock switch. When either door lock switch is operated, this supply voltage is pulled to ground, providing the BCM with the required lock or unlock signal. In order for the BCM to distinguish between a lock and unlock signal, the lock switch contains two separate paths for this voltage to flow to the same body ground. When the switch is operated to the unlock position, the supply voltage flows to ground through a 1.5 K? resistor. When the switch is operated to the lock position, the supply voltage flows to ground through a different part of the switch circuit, which has no resistor. The BCM then interprets the flow of voltage as a lock or unlock request and powers the door lock actuators to the appropriate lock or unlock position.


Door Locks Go Crazy 1
Door Locks Go Crazy 2
Door Locks Go Crazy 3


Dec 19, 2017 | 2008 Chevrolet Malibu LT

1 Answer

My Toshiba model 40E210U flat screen tv freezes up and the picture fades away. Sound locks up and gets louder. Any suggestions?


I would start with having the power supply checked. If the power supply is in good working order, I would then suspect the main board.

Oct 24, 2012 | LG 32LG40 32 in. LCD HDTV

2 Answers

Power supply hp 1020 lasserjet printer


Hello,

You would need to order:
Engine power supply 220V to 240V (HP LJ 1020 printer) RM1-2316-000CN
You can call HP Support and order for the above RM... part number.

- Nikhil

Nov 12, 2008 | HP LaserJet 1020 Printer

1 Answer

1150 won turns on then shuts off


Intermittent power on and off indicates a power supply failure. Check your power supply to make sure if it is working fine.

Oct 06, 2008 | Dell Inspiron 1150 Notebook

8 Answers

Pc won't turn on


Hi, Are you able to test or repair some of this your self? is so use a multimeter and check the power supply,If you get no reading then remove the unit and open the cover, on the printed circut you will find a fuse either glass or ceramic. Replace this and also clean all dust from the unit replace the cover and reinstall in computer. If this fails you may need a new power supply unit. Regards mistyman

Sep 07, 2007 | Dell - NPS-200PB-73M (NPS200PB73M) Power...

Not finding what you are looking for?
Sony SDM M81 18.1" LCD Monitor Logo

Related Topics:

1,368 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a Sony Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...