PROBLEM WITH PT61LCX65,PICTURE IS ZOOMED IN AND OFF CENTER

Did you check picture size settings?

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

What model Samsung camera?

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts.
https://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

hello!
Have you tried to toggle "format" or "screen size"? On those sets non HD and HD settings could be adjusted separately. Try that, first. If no luck, try similar settings on PS3. I bet, you will be able to match screen format there, as well. To me it looks, like picture formats are mismatched. Also: try to use "component" cables, instead of DVI adapter cable, if nothing works.
good luck,
Alex.

If you checked in the tv menu and it's not zoomed in their then the issue might not be with the tv. If you are using a decoder check it to make sure it is not sending the picture to the tv already zoomed. Check the settings of your decoder or try hitting the # button on your remote, some products use that button to zoom the picture.

you have it zoomed in thats why. go to menu and change aspect ratio and zoom let meknow if that helps also you may have it zoomed in from your cable box.

If the image on screen is zoomed both in vertical and horizontal direction, your TVs power regulator inside it is faulty. [Overvoltage]. If it is zoomed in vertical direction only, that is only the height of the picture is zoomed, you can adjust it with the remote control button directly on going through menu and get in to the function menu. Normally all TV remote has a special button marked as "Zoom" which on pressing it once the picture get zoomed, again another press the picture gets wide and again an another press picture will come to normal mode. You should select normal mode to retify the problem.

Unfortunately the image is not able to be saved if you have zoomed in on it. The camera does not have the ability to save images that way. You can download the image and use photo editing software to cause that zoomed in effect to happen so that you are able to print the image that way.

with remote control use Zoom boton, or enter to menu and seek for this option.