Hi, I have this Syntax Olevia TV and it does turn after about and hour and it blinks the red and green light and cannot turn it back on unless I unlplug it for at least 5 mins. Also, the coloring of the TV has reddish hue and using the color adjusters does not help. We have replaced the bulb as suggested by others and it has done nothing. What do you recommned? We have only had this TV for 2 years.....
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I have a 532-b12 so it may be the same - but not sure.
Push the small round "menu" button on the remote.
A pinwheel should show up in the upper left corner.
Use the up/down and left/right arrows to go to picture.
From there, you can change, saturation, color, contrast, etc.
Hi, Question shows tv is Sony KDF-60WF655. Green light blinks when tv gets prepare to fire up lamp, check internal circuits then show picture on front screen. Red light blinking shows some kind of internal problem during circuit check and protection got activated upon some failure. Count the red light blink as you will see 3 second long pause and post it here to diagnose what section of tv got problem. Did you replaced its lamp in last 2-3 years? Thanks.
There are two places to look for the problems, the backlight inverter board and the power supply. Look at the power supply first since it is easier to get to, look for burnt parts, bad capacitors, etc. http://en.wikipedia.org/wiki/Capacitor_plague Please post back what you find.