Question about Washing Machines

1 Answer

Hi, I recently purchased an Omega Constellation automatic, strap & watch 18crt gold. With original cardboard box & red leather bound watch case. OK so far. Now the fun. Inside back case: 151.9132. G107.1. In a circle is No 17. Inside back of watch: 37039451. omega sign with 711 under it. Adjusted two (2) positions. 24 jewells. Co's logo. Intigrated twisted wire type strap. 351.0064 750 under, again No 17 in circle. Can I find it? can I not. [email protected]

Posted by burdy12 on

  • Jeff Rockwell
    Jeff Rockwell May 11, 2010

    Don't understand exactly what you're asking. You mentioned a bunch of features and a bunch of numbers, and asked "can I find it? can I not.", but never mentioned WHAT you were looking for. Also, you posted this under "Washing Machines". You may get quicker assistance if you repost this under a subject related to to what it is.

×

Ad

1 Answer

Anonymous

Sorry about that but thought I was in the omega watch site.
Washing machines!, just my luck. 1st time I have used this site.

My problem is that I cannot find this particular model on most of the omega watch sites I have tried and was wondering, a) is it a fake, or b), is it rare.

Further info I missed out, the dial, its oblong.

Thanks for your time, Best regards, clive b

Posted on Apr 10, 2008

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

tip

How to exchange leather straps for almost any watch brand

Most of the people are pretty sure that when their watch leather straps are worn out they have to replace them with new ones, made by exactly the same brand as their watch brand is. This is completely wrong. About 95% of all watch brand models can be fitted with leather straps from any watch strap producer without loosing brands identity. All you have to do is: 1. Release the strap from the watch; 2. Measure the width of the strap where the spring bar (pin) goes through and write it down or memorize it; 3. Undo the buckle/clasp; 4. Measure the width of strap in place where the buckle/clasp was fitted and write it down or memorize it; 5. Measure the length of the strap (both parts together) and write it down or memorize it. Now you have everything you need for strap replacement. Visit any shop selling leather straps or even find it on the internet. You will find thousands of different colours, patterns and leather variations. The choice is yours. Just one thing to remember: The strap you are buying must match all the measurements you took of your original strap. This is not difficult to match, as the watch straps usually are made to global standards. When you have your new strap delivered, just fit it to your watch and undo the buckle/clasp that came with it. Fit your old, original buckle/clasp on to the new strap and you are done. Most watch manufacturers impress, engrave or laser engrave their logos on buckles/clasps, not on the leather straps itself. So, when you fit the original buckle/clasp on brand new strap of different make, it becomes the original strap of the watch you own. And nobody knows that the strap is, for example, from Hong Kong, but watch is from Switzerland (except you, of course} as they look together as one nicely designed piece and the buckle/clasp works as the proof of identity. In case if your watch has some unusually shaped fixing for the strap, this shape can be easily cut in to the strap by modellers scalpel. At the very end I just want to remind to all readers: Watch straps sold under watch brand names are 2-10 times more expensive. In fact - they are not produced by watch manufacturers themselves, but in Italy, Germany, China and Hong Kong and then sent to watch manufacturers. Just because these straps were fitted to the watches and the buckles or clasps were added to them, these straps automatically becomes their brand straps and cost a lot, lot more. Hope it helps to save your hard earned money.
on Jan 10, 2010 • Watches
0helpful
1answer

Omega 196.0167 cal 1342

The watch part number and a knowledgeable watch maker will provide the correct bracelet. If you WANT a leather strap most models can accept one - unless the case is sculpted to integrate seamlessly with the bracelet, in which case you may not be able to insert the spring bars that are necessary to mount the strap.
1helpful
1answer

Watch is about 6 years old. Went in for a "clean and service". Running a little slow but otherwise ok.Cost $350.00. for clean/service. Now it stops intermittently. Been back to repairer four...

All decent watch repairers should issue at least 6 months warranty on their craftsmanship. If the watch repairer can not resolve the problem and your watch is still stopping, you can ask for full refund. Next time save your nerves and time - find on the web where your nearest Omega dealer is and bring the watch to them. It may take quite a lot of time and cost dearer, but you will have your watch serviced at proper Omega workshop and will get original Omega warranty.
0helpful
1answer
Not finding what you are looking for?
Washing Machines Logo

Related Topics:

166 views

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8221 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1482 Answers

Brad Brown

Level 3 Expert

18829 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...