Question about Lexmark X2500 All-In-One Printer

1 Answer

Fax driver I have an all in one printer,fax ect.I have installed the hardware but everytime I try to fax it says that the fax driver is missing.Lexmark 2500 series.How do I get a driver??

Posted by murrel on

  • 1 more comment 
  • Anonymous Jan 09, 2009

    I went to lexmark web site and downloaded the new set of drivers and installed them but I am getting the same error. Any other solutions

    John


  • Anonymous Jan 11, 2009

    I just went to the lexmark site, downloaded and installed the new driver and still have the same problem too.

  • Anonymous Jan 11, 2009

    Me too. just downloaded and installed the driver in case my CD was bad, but I have this same problem.

×

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 207 Answers

You can download driver from this page. Just select your OS and start download. http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:1:0:590:0:0

Posted on Apr 10, 2008

  • Anonymous Jan 28, 2011

    WHAT IS YOUR OS

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I owe a Lexmark Printer X2580 and I lost the instalation CD. I downloaded the file cjr2500EN.exe, I installed it, but when I try to send a fax I get the following message: "The fax driver is missing...

The Lexmark Fax Solutions software can be installed using the installation disc that came with your printer. Please contact Lexmark technical support for additional assistance.
5helpful
3answers

WHERE DOES THE PHONE CORD GO???

your computer has to be equipped with a fax modem according to the getting started guide http://www.lexmark.com/publications/pdfs/2007/2500/v3708617_en.pdf page 33 And you use the software that came with the printer.....Also try this if you have internet connection on your computer Make sure your printer is connected with usb Go to the control panel click printers and other hardware from there you should be able to set up faxing Here is the full manual http://www.lexmark.com/publications/pdfs/2007/2500/v3709407_en.pdf
2helpful
1answer
7helpful
4answers

I dont have the lexmark 2500 cd installer, so how can i install this printer

What you are looking for is commonly referred to as drivers.
You can go to the Lexmark website and click on the link titled downloads.

You will then be at a page where you will be asked to put your model number.

Two things you are going to want to now before you start this process.
1) What is the whole model number of your printer. e.g. (x2500, cri2500, etc.)

2) What operating system doesn't the computer use that you are trying
to connect this printer to.

The site should also include instructions on how to download and install.
0helpful
2answers

Using my lexmark 2500 all in one as a fax

Firstly place the line cable in the wall and 2500. The go to the menu to the fax settings. There you can set up your, rings to answer, name number receive mode, ect. Fro further detail consult the user guide. If you do not have one, down load it from Lexmark's website.
Good luck
3helpful
1answer

The printer will not communicate with my computer

hit start on your computer and click on printer and faxes - follow the directions.
if this doesn't work, click on start, click on control panel, click on add new hardware and follow directions.
if it still doesn't work post this question in the computer section
0helpful
1answer

Wount fax or receive faxes

That sounds like it might be a hardware problem, but you can try updating your drivers first.

http://www.lexmark.com
Drivers and downloads
Find a driver
Start typing X427 into the box, and click on your printer name when it pops up.
Download the driver.
Install.
0helpful
1answer

Fax driver issue

Same problem. I was using the cjb6500en.exe file which does not contain the OCR and FAX drivers. Use the installation CD and select Custom->Update Driver and Install Optional Software to add the FAX driver.
1helpful
6answers

Lost cd to install lexmark2500seriea

lost my cd to install lexmark 2500 series printer
12helpful
6answers

Lexmark 2500 Scanning

my lexmark 2500 scan wont work I get App4r exe problem...
Not finding what you are looking for?
Lexmark X2500 All-In-One Printer Logo

Related Topics:

1,895 views

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Ekse

Level 3 Expert

13435 Answers

Cindy Wells

Level 3 Expert

6370 Answers

Randy Prevost
Randy Prevost

Level 3 Expert

894 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...