Question about Robotoolz RT-5250-2XPK ePlane XP High Power Automatic Leveling Laser and E

Open Question

Can't Calibrate Robotoolz RT-5150

Porter Cable "Robotoolz" Laser is out of alignment; cannot get the unit to calibrate per manual's instructions.

Posted by msdurwall39 on

Ad

3 Related Answers

Anonymous

  • 14 Answers

SOURCE: cant calibrate laser

You must place the unit 30' from a wall, level the unit with the level indicating vials, mark spot on wall or object, rotate laser 180 degrees and level with vials again, if it comes to the same spot your unit is calibarated. if not then you must do this process at least 2 times(1 for each directional level) and use the adjusting screw to move vial. it takes a while to get it right.

Posted on Jul 12, 2009

Ad

Anonymous

  • 677 Answers

SOURCE: Porter Cable was sold to Bosch, I called Bosch but

Here is a website of a company that repairs :
www.prontotech.com

Posted on Feb 05, 2010

Ad
#1 Taper

Jim Parker

  • 1041 Answers

SOURCE: i have an rt-5250-1 self

If the directions are not real clear as you say, then you should call the manufacturer to get tech support. I will send you a link to there site and phone #.

http://www.toolauthority.com/RoboToolz-RT-5250-2XPK.html

Good Luck!

Jim

Posted on Sep 13, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do I calibrate porter cable laser RT-7510-3 laser light works but stuck out of level

The handhelds are not meant to be calibrated, recycle properly and invest in a PLS3 or PLS5, they have a 3 year exchange warranty: https://www.plslaser.com/pls-best-class-warranty/
0helpful
1answer

Robotoolz Laser RB01001 calibration and manual

http://www.microprecision.com/instrument/ROBOTOOLZ-RB01001%20-CALIBRATION.html This would be a professional calibration to many known standards. I hope this helps you out. Thanks for visiting and leave feedback! I'm a newbie
0helpful
1answer

My Robotoolz : RT-7210-1 was stored improperly and now the lazer beam is dim and hard to see in bright sunlight... Could really use info on repair or info on a place that can repair it for me.

Improper storage (I've done it too), usually means that the batteries have become too hot - and
therefore weak. The first thing I'd try is changing the batteries.
The 635nm laser operates on (4) AA batteries, and the rotary uses (1) 9V battery.
The online reviews for this a horrifically bad - see:
http://www.gosale.com/4364289/porter-cable-robotoolz-rt
1helpful
1answer

How do i calibrate a dw 087k laser

Here is a link for the owners manual for that particular laser. http://www.dewaltservicenet.com/documents/English/Instruction%20Manual/593338-00,DW086.pdf
In there are the instructions for a Field Calibration Test. These units should be sent to DeWalt Factory Service for Calibration. If the unit is less than 1 year old they should calibrate it for free under their "1 Year Free Service" warranty.
0helpful
1answer

I have a RoboToolz RB01001 rotary laser. The green light comes on for approximately 2 sec. then goes out and the unit does not function at all. It has very little usage and has been cared for, never tossed...

That's usually a battery problem either in the laser unit or the remote control. The battery in the remote tends to disconnect if bumped. A small piece of foam pad at the bottom of the battery can fix that.
2helpful
1answer

Hi I need a manual for porter cable robotoolz RT-7690-2 blaser level . Thank you.

You can get the manual on the link below please give it time to download. It is a large file.

http://www.ferramentaonline.com/shop/az/futtura/RT-7690-2%20series%20user%20guide.pdf


Good Luck and please rate 4 thumbs up for the free answer.
Jul 01, 2010 • Garden
0helpful
1answer
4helpful
2answers

Cant calibrate laser

You must place the unit 30' from a wall, level the unit with the level indicating vials, mark spot on wall or object, rotate laser 180 degrees and level with vials again, if it comes to the same spot your unit is calibarated. if not then you must do this process at least 2 times(1 for each directional level) and use the adjusting screw to move vial. it takes a while to get it right.
Not finding what you are looking for?
Robotoolz RT-5250-2XPK ePlane XP High Power Automatic Leveling Laser and E Logo

Related Topics:

305 views

Ask a Question

Usually answered in minutes!

Top Robotoolz Measuring Tools & Sensors Experts

ADMIN Canada
ADMIN Canada

Level 3 Expert

41445 Answers

ray gallant

Level 3 Expert

73749 Answers

 Mikey
Mikey

Level 3 Expert

6726 Answers

Are you a Robotoolz Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...