Infocus IN72 powers up but no image, replaced the bulb but still no image...
My IN72 is about a year and a half old so it's out of warenty. It powers on but no image is displayed. The projector bulb never fires and I don't see any light in the lens. I can hear the projector trying to fire the bulb but it tries 5 times and it shuts down. The led code indicates bad bulb so I bought a new bulb and replace it but it is still acting the same. HELP!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
firdt off, did you reset the lamp counter? did you clean the dust out of the projector? it may be overheating as well. if the lamp looks ok, you may have just blown the ballast. try projector doctor online.
Hi, this seems to be lamp only, go the menu setup and press service info : then you get the lamp hours used if it is more then 1500 hrs you must change the lamp if less, try cleaning filter then reset the lamp again. if problem persist. lamp has to be changed.
My understanding when we purchased our IN72 2 years ago is that there wasn't any additional benefit for Cable box using HDMI since the IN72 does not transmit audio so using component cables for cable was optimized enough. We have our DVD player connected via the HDMI only. Possibly the transmission from cable box through an HDMI is not compatible audio is confusing it? hard to say. Cable HD channels look awesome thru the compenent cables, the max for IN72 is 480i anyway.
We've got 35 ft cables for all 3 hdmi, compenent, and that vcr one too and it's worked great.
I have an infocus lp70+ it turns on and displays an image for about 2 seconds even if you push the menu button, then the bulb powers off and it acts like it overheated. It does this when it is clearly not overheating. Please help me, I can be emailed at [email protected]