I need some of the plastic drive wheels for this dual deck. Does anybody know where I can get parts for them. Does anybody know who made the decks?
spills tape, take-up reel dont turn. does not fully unload the tape. all motors run. mode switch appears ok.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I have just spent half a day trying to replace the drive belts in my sony twin deck unit , in the end it still didnt work as the the old rubber belt did some damage to the unit , anyway shops like **** smith or tandy stock the drive belts , take the front of the unit away from the main case there will be a plastic casing that surrounds the belts there are at least two belts, there should only be two small screws undo these and move the plastic unit forward on the plastic mounting brackets then you will see the metal wheel and the plastic wheel that you fit the belt around , its a bit fiddly but i can do it in my sleep now even though the motor died it was a good experience
This unit needs an overhaul. Specifically, there are belts and idlers that should be replaced. The rubber has dried up a bit and is slipping. This is a common maintenance item and should cost about $20-$40 in parts plus hte local labor charge.