Question about Whirlpool Pearl Navarre 7242 True Bathtub with Back Massage - 103558-100

Open Question

Have a pearl dante corner tub. neednew wire

Have a pearl dante corner tub. need new wire harness from control box to touch control button , but actullay i could fix the cable i have but i need a wiring diagram. Model #157062-1

Posted by ctempmasonry on


4 Related Answers


  • 248 Answers

SOURCE: i have a leaking jet in a pearl jet tub. it's an

one of the quick ways to fix leaks at jets is by using Millaput two putty resins mixed and worked round the outside of the defective jet hope this helps

Posted on Oct 03, 2009



  • 1 Answer

SOURCE: My pearl whirlpool bathtub has turned on

Sorry, didn't realize I would need to pay money for the answer. I will deal with Pearl bath on my own. Thanks for the help, please remove my email from your mailing list.

Posted on Nov 03, 2009


US Parts Center

  • 719 Answers

SOURCE: i need new trim parts to change from gold to

go to you should be able to find the parts for your tub there.

Posted on Dec 22, 2010


Rick Ead

  • 1998 Answers

SOURCE: I have an Aquaglass unit

if your in the north east you would call masco bath at Phone: 856-235-7700
in the midwest you would call Phone: 810-664-8501
in the south Phone: 731-632-0911
and in the west Phone: 800-632-0911 this is the manufacturer and they would be able to provide you with a wiring diagram for your control if you have any further questions message me back Thanks again Rick

Posted on Jan 21, 2011

Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a jetted tub and it won't turn off. I have a single button in the back right corner and i don't know what to do!

Right now you are having to turn it on/off by using the circuit breaker or just unplugging the pump right?
Is this a button you depress or an electric button like you would find on a microwave?
If it is a button you depress to turn it on/off then the problem is most likely the air switch located in the motor under the skirt of the tub.
If it is an electric button then it may be the control box under the tub that needs to be replaced.

US Parts Center

Feb 02, 2014 | American Standard Home

1 Answer

Wiring diagram for ff32atc control box

If your hot tub has been submersed by water then you are going to need all new controls for it.
NEW control box with a new topside, New motor and whatever else is electrical under the skirt of the tub.
Start your search by getting the brand name and model number off each item.

US Parts Center

Mar 19, 2013 | Pool & Spa

1 Answer

What's youI just wired in my J-300 Jacuzzi hot tub. The GFI trips every time I reset it. I took the GFI out of the equation and the tub runs fine, does not trip the breaker at the main breaker box

2. There is a short. You need to get multimeter and start checking each part for current running to ground wire.
3) Power is ON. Connect power without GFCI.
4) Tape tester leads to wood sticks to keep hands away from power.
5) Do not touch anything directly or you will become the ground rod.
6) Ground wire must be present, and bonded back to main panel box.
7) Do not sit or touch directly on cement or bare ground. Do not touch or lean into anything made of metal.
8) Body and parts must be on sheet of plywood, or similar non-conductive dry surface.
9) Test each part with spa, but also test electric line coming from main box.
10) GFCI will also trip with any fault detected on line. So the wire coming to spa may have the fault.
11) Add a new dedicated line from main box to spa.

If you need further help, I’m available over the phone at

Oct 02, 2012 | Electrical Supplies

1 Answer

My pearl whirlpool bathtub has turned on mysteriously when no one is home and no water in the tub...only one years old! Is this a sensor problem? Motor problem? touch-pad control problem? Please help, I...

Sorry, didn't realize I would need to pay money for the answer. I will deal with Pearl bath on my own. Thanks for the help, please remove my email from your mailing list.

Nov 02, 2009 | Whirlpool Pearl Ballade True Bathtub with...

2 Answers

Hot tub blows 50 amp breaker after about two seconds-does move water. about half full of water, bought tub used and sat for a year empty

I think you have a small leak somewhere that is causing the GFI to kick off. ... and it is probably quicker than 2 seconds.

Look carefully inside the control box - that is where I found the leak in mine.

After you get it fixed (and you may have to buy a new control) pat yourself on the back for having saved yourself at least $250.00.

Good luck with your project.


Oct 14, 2009 | Pool & Spa

1 Answer

I have a whirlpool custom series frig & the bulb has gone out. After switching it with 2 new bulbs with no results, I wonder if there is an electrical problem? Additionally, what appears to me to be...

Yes KariAnn,
I have replaced 3 of these this week already, its the control box,lower left corner inside white plastic box, when light bulbs blow out it surges& the control board is ruined, its quite common, replace it with a new board no need to replace the cover or box with a new one, go to appliance parts pros or call 1-877-477-7278, the cost will be about $85.00 with shipping included, UNPLUG REFRIGE FIRST, and remove control board(2screws) on back of refrige, take off plastic cover and unplug 3 wire harnesses and install new board put cover back on and its good to go......if you have any other questions I'm at [email protected] or 24/7 Appliance Service (608)214-5632....Regards Daniel

Oct 08, 2009 | Whirlpool Refrigerators

1 Answer

Jacuzzi nova 532 motor run's but won't stay running

If it has the little oval off/on button, it sounds like the control box or off/on button is bad. If you have access to the pump assembly, follow the pump power cord to the little black box (zip tied to a tube up high), this black box has a small cable that goes to the off/on button. unplug the pump from the box and plug the pump into the power outlet. it should run continuously. If it runs, you need a new control box or /offon button. Buy the off/on button first, as this button is prone to water getting into it, and costs less than the control box.

Mar 25, 2009 | Whirlpool 5' Jacuzzi Tub Bathtub Cetra...

1 Answer

Pump does not start, it does have power

Touch pads usually have three wires connected to a low water sensor (two wires) all running into a control box with a circuit board inside.
If you are in the tub and the tub is full of water and you then touch the 'pad' to turn the pump on and it doesn't turn on then the problem is most likely the box those wires and the pump plug into.
Get us that number off the box and we can solve this for you.

Feb 20, 2009 | Crane & Co Crane Plumbing 2386W Oval...

1 Answer

Parts for my pearl corner tub

any plumbing suply house would have it. good luck

Feb 18, 2009 | Whirlpool Pearl Navarre 7242 True Bathtub...

Not finding what you are looking for?
Whirlpool Pearl Navarre 7242 True  Bathtub with Back Massage - 103558-100 Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Home Experts

john h

Level 3 Expert

23438 Answers


Level 3 Expert

4369 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

34004 Answers

Are you a Whirlpool Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides