Question about Microsoft Windows XP Professional With Servise Pack 2 (e8503040) for PC

1 Answer

Treadmill Troubleshooting How come my treadmill belt is acting like it is sluggish. It is about 1 year old. It will go full speed but everytime it is about back through it slugs behind

Posted by mala08 on

  • mala08 Apr 13, 2008

    I believe you probably would have to lose the weight. I don't see how weighing 103 pounds would cause my treadmill to break and oh ya I had no idea that this was even about windows xp they sucked at advertising what their website is used for. I guess you don't have anything better to do than just sit around and answer lame questions and comments to everyone do you?

×

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 86 Answers

Whats this got to do with windows XP?
why dont you loose more wheight before you get back on it, you may be creating tension way beyond its maximum manufacture capacity.

Posted on Apr 12, 2008

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Where to buy hammer WalkRunner RPE treadmill parts ?

Two places here.

Treadmill Belt for HAMMER WalkRunner RPE - GYM PARTS

https://www.gymparts.co.uk > hammer-walkrunner-rpe-...
Hammer WalkRunner RPE Treadmill Belt Kit Replacement - Upgrade Today to an Expert Fitness UK Replacement Treadmill Belt - Part Number 3-0248 Another ...

HAMMER Treadmill WalkRunner RPE - HAMMER - Fitness

http://www.hammer-fitness.co.uk > ... > Treadmill
HAMMER Treadmill WalkRunner RPE. Delivery time: 1-3 workdays. 1 / 5. High performance 1.25 HP motor with speeds up to 16 km/h. Speed control buttons on ...

..
0helpful
1answer

How do i fix a lifegear treadmill 97520?

Try below:

ERROR CODE
DESCRIPTION
E1
Speed error (The treadmill running speed is 3.2 kph faster than the displayed
speed). The treadmill will stop immediately when the console detects this error.
E2
Speed error (The treadmill running speed is 3.2 kph slower than the displayed
speed). The treadmill will stop 16 seconds later after the console detects this
error.
Troubleshooting / Resetting error codes
In the rare event of the treadmill displaying an error code ("E" followed by a number), simply reset
the computer by:
1. Step off the treadmill. Ensure that you are clear of the running belt.
2. Turn the treadmill off at the master power switch located near the motor housing.
WARNING: Ensure nothing is positioned near or under running belt which may possibly block
it's normal operation.
3. Turn the treadmill on at the master power switch.
4. Ensure that the Safety Tether Key is securely and properly installed onto the console or just
reinstalling the Safety Tether Key can also reset the display.
If the above does not clear the error code, please contact the nearest Dealer/Service Center

LifeGear 97320 Owner Manual Page 17
0helpful
1answer

Pro form sport 1000 treadmill goes full speed on power up

Typically when this occurs, it is an indication of a short circuit in the motor controller board. To test to make sure the problem is in the board


1) Unplug the treadmill from the wall.

2) Remove the motor hood.

3) Unplug the speed wires from the board. On many boards, you will have 2 to 3 wires that control speed and many are labeled H, W, and L. If you cannot find the speed wires, do not guess, contact us with your make and model number and we will try to help you with the wiring.

4) Return the treadmill to a usable position once the speed wires are disconnected and plug the treadmill back in.

5) If the treadmill begins to run at full speed, the motor control has failed and requires replacement.

6) If the treadmill does not run at full speed you could have a speed input problem, wiring problem, or another short circuit.

For any further troubleshooting questions please do not hesitate to contact us, our number is 888-713-2880 or check out our Tech Support Center online

http://www.sportsmith.net/supportsearch.aspx

Always hear to help, SportSmith
0helpful
1answer

Proform 400 GI - Treadmill

go under the HOOD cover the instruction for RUN the software calibration for easy diagnostic , and fix it.

God bless you
1helpful
1answer

Squeek in motor of 6110p treadmill

Dear Sir:
The motor you can be oiled . But see the next instruction.

RUN THE SOFTWARE CALIBRATION FOR Easy diagnose and troubleshooting , see the instruction under the Hood of Motor, and follow the step or user manuals. Inspect the 1) Potentiometer + gear of the same Pot ( lubricate very slight).

sincerely. God bless you.

ernesto cuadra
managua, nicaragua. c.a.
0helpful
1answer

Loud squeaking on my Reebok 9500 ES (three years old) from under the hood when the foot hits the treadmills - at various speeds and inclines.

HI,

Its time to lubricate your treadmill.
You must obtain the proper lubricant for your treadmill. There are several different types. Contact your manufacturer for what type is needed. Using the manufacturer provided allen wrench, loosen the walking belt approximately 10 full turns on each side of the rear roller. Apply approximately 1/2 ounce of lubricant directly in the middle of the walk area underneath the walking belt upon the deck. Retighten the rear roller 10 turns on each side. Run the treadmill at 6.0 mph for 2-3 minutes to spread the lubricant evenly. Wipe excess lube from the sides of the belt. Walk on treadmill to check for proper tension on belt.
for make it easy for you I have added a video. ok


3helpful
2answers

Tredmill not moving

That's an embarrasing admission. A treadmill works like a conveyor belt or a car's fan belt. If it is too loose it will slip under load. There will be an ajuster on your treadmill. All you have to do is tighten the belt. Do not overtighten it though. an
1helpful
1answer

I have a 6 year old Reebok RX5000. At speeds

They walkbelt is most likely worn out causing too much friction overheating the motor.
0helpful
1answer

Our EXP1000 treadmill is about 10 years old and we have not had any problems with it. The belt recently has been going slower than before. for Example, we used to walk at a speed rate of 4.5, now it...

If belt hasn't been replaced that's your poblem. If that's more than you want to put in a 10 year old treadmill, try lubricating it. That may bandaid the problem for a while. This will progressively get worse over time.
Not finding what you are looking for?
Microsoft Windows XP Professional With Servise Pack 2 (e8503040) for PC Logo

Related Topics:

46 views

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

Ekse

Level 3 Expert

13435 Answers

Mandeep  Singh
Mandeep Singh

Level 3 Expert

1184 Answers

k24674

Level 3 Expert

8092 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...