Toshiba e-Studio 162 - how do you add a user's name and email address permanently for scanning to email?

You can create user (email) in address book from copier control panel as well. Then when you press scan, the email contact address will be there to select.

Press User Function --> Address --> Address Book --> Select your contact --> Edit
Change the email address on the contact.

U can store all the users emails on address books. Then when u want to perform scan to email, just press the email button on the particular to add, re-press again to remove.

if you are connected thru the network the best way is to start Top access then click registration tab,then address book. on that page you will find add address.
or on the machine press "user functions",then tab address,then press address book,find free slot, press entry. there u will find space everything. after U enter just confirm that and that it.

here's how to add contact to the address book:

1. press FUNCTION key
2. select FAX/EMAIL SETTINGS icon
3. select ADDRESS BOOK
4. select ADD EMAIL ADDRESS
5. input your email address
6. input your name
7. select ok
8. input a key name
9. you can choose if you want to add it to favorites or not
10. press stop key to return to idle state

that's it :)

As far as the name goes, I assume that it must be a watermark / overlay that is programmed into your printer driver. Go to the printer "properties" and go into "printing preferences" and select "custom settings", and check the watermark/ overlay settings.
There are a couple of different drivers , so the location of this could vary slightly.
As for programming Email?
If you have some addresses programmed and working already?
The easiest way to add more is to open a web browser and type your printer's ip address in the address bar, select "administrator Mode".
The default user name is "admin". The default password is either "password", or just leave blank (can't remember which)
select "address book", then you will see the names of the destination you have programmed. If you highlight one of them and select "change" you will be able to view the settings that need to be made. Then exit out of that page, and select "add" and input the information for the new destination.
If you have not setr up scan to email, you will need to make many other settings in the web browser that I cannot go through, but it involves all of your TCP/IP settings, email settings such as user name, password, SMTP, POP, etc...etc.
Hope this helps.

go into user tolls, system settings, administrator tools, address book management. or use you web browser and for an address type in the IP address of ur machine and log in. the default user name is admin with no password then click on address book.

Please click the below mentioned link to download the manual:

Toshiba e-Studio 282 Manual

Thank you

clean the main charger unit

Do you have the Ga-1170 kit?