Mp460 canon printer-coppier broke down error code 5010 mascine still under guarantee

Check the manual that came with it for the answer to the codes.

hi
"Issue: ERROR LCD: Error Code 5010
Solution: Press ON/OFF switch to reset the multifunction device

Reset the device when it is not functioning properly.
If the device is not functioning properly or to clear memory, reset it.

1. On the operator panel, press and hold the button for one second. (The display will go blank.)

Note: It may be necessary to unplug the power cord if pressing the ON/OFF button does not shut off the printer.

2. Wait approximately ten seconds and then press the button again.

3. Wait until the device has completed its cycling process before submitting another job request."


or

go to following link you will have more solution

http://www.subnixus.com/error-codes/error-5010.html

The 5010 error is a scanner error, the lamp is dead, or the scan assembly is stuck. There are no parts, only whole scanner assembly replacement. You get a one year warranty with Canon, after that it could be a $200.00 repair.

Hello, The error 5010 refers to a scanner issue, make sure all the connectors are seated and all flat cables running to the scanner unit are firmly seated, turn printer back on and the error should clear. I hope this helps.

Call Canon technical support.
Dial 1-866-261-9362, Monday - Friday 10:00 a.m. - 10:00 p.m. ET (excluding holidays).
See also a previous related question here! (a scanner issue)
http://www.fixya.com/support/t1232529-error_code_5010_cannon_mp460_printer

Canon PIXMA MP460 error code 5010

solucion a email [email protected] the error 5010

1. Press ON/OFF switch to reset the multifunction device 2. Removing paper jams MP450 / MP460 3. The MP460 may require repair

errore code 5010

comme caz.... si po agiustare sta mer...????