Question about LG 42PX5D 42 in. Plasma HDTV
Digital channels drop out, then the signal strength reports as bad, therefore unable to auto program. Or manual program. No aerial problem, our other digital tv is fine. We have recently replaced the mainboard, reprogrammed it and the channels were present for about 5 days, then a re-occurance of the problem.
SOURCE: tv has no signal
sounds like the EDID data has been corrupted in your main board. it can be reprogrammed but most techs will just replace the board. either way someone will have to come out and look at it. it should have a 2 year parts and labor warr on it. call LG cust service and get someone out there.
Posted on Jun 03, 2008
You need to press the button on the top right of the control ( the TV button) once and that will allow you to control the tv once again. Problem occurs when you accidently push VCR or DVD button which means remote control will try a different frequency to operate a VCR or DVD that isn't there. Hope this helps.
Posted on Sep 18, 2008
Do a first time installation, move the TV or bite the bullet and either buy an external aerial or extend the main house aerial cable to reach the TV. assuming your TV has no signal where it is now
Posted on May 04, 2009
SOURCE: Unable to tune my LG Electronics Digital TV (Model 37LC2d-ec) to receive digital channels (have tried auto and manual program). TV will only receive basic standard channels. TV bought in Uk - now livi
My LG plasma TV 50pc3d when power-on only see vertical bars. what 's going on. please help. Thank you
Posted on Jul 22, 2009
Tips for a great answer:
Feb 24, 2015 | Televison & Video
Sep 07, 2014 | Televison & Video
Oct 26, 2012 | Dell Vostro 200 PC Desktop
Feb 01, 2012 | Sony BRAVIA KDL-40S2000 40 in. LCD HDTV
Oct 23, 2011 | Televison & Video
Feb 28, 2011 | Televison & Video
Nov 10, 2008 | Olevia LT42HVi 42 in. LCD Television
126 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: