One For All URC-4021 Code Entry

One For All URC-4021 Code Entry



To program your One For All URC-4021 remote control to operate your TV you can use the direct code entry function.

To enter for a code for your TV follow these steps:

1. Turn on your TV.
2. On the remote, press the TV key once.
3. Press and hold SET until the LED blinks twice, then release SET.
4. Enter the first four-digit code from the code list. The LED will blink twice. If it does not blink twice, go back to step 2 and try the same code again.
5. Aim the remote at the TV and press POWER. The device should turn off. If it does not turn off, repeat steps 2 through 5 with the next code in the list.

I hope that helps.
____________________________________
One For All URC-4021 Manual
One For All URC-4021 Code List
One For All URC-4021 Code Entry
One For All URC-4021 Code Search
One For All URC-4021 Reassign Key