Question about Proform 675 E Treadmill
First we need to do a calibration follow this procedure
Press the Stop and the Speed Up keys down while inserting the safety key.
Press the Stop key one time. The Time window should read EP:2P. Some newer models may also say FP, Pass, or the like. This means that it passes the EPROM test.
Press either incline key and the incline will calibrate automatically.
THIS IS A VERY IMPORTANT STEP BECAUSE YOU WILL GET AN ERROR MESSAGE IF THIS STEP IS SKIPPED. After completing calibration of incline, press the Stop key and then remove the safety key.
If the incline moves but you it will not operate normally nor calibrate, check the wiring from the incline sensor to the power board. If all looks normal, put it back in calibration and see if you see a blinking “- -” symbol in the incline window when you are calibrating. If not, the incline sensor is bad Call icon Fitness @ 800-999-3756, they may have the sensor or they tell you, you need to replace the incline motor
Posted on May 31, 2010
Tips for a great answer:
Jan 19, 2017 | Nordic Track Exercise & Fitness
Nov 26, 2015 | Exercise & Fitness
Oct 10, 2012 | Precor 927 Treadmill
Nov 28, 2011 | Nordic Track Exercise & Fitness
Jan 04, 2011 | Proform CrossTrainer Treadmill
Aug 06, 2010 | Nautilus Tr300 Treadmill
Jan 05, 2010 | NordicTrack Exercise & Fitness
Mar 22, 2009 | Exercise & Fitness
1,038 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: