I have a HP Ipaq H6340. I just got it from a

try to reset it

Your HP IPAQ has a SDIO expansions slot...

which is a new technology.

so will have to use an SDIO card ...
this is a secure digital IO card.
hope this will solve the problem

ask hp yet


https://h30434.www3.hp.com/

i hope the ipaq is a windows based mobile, or what is also known as pocket PC. If am right, then it will not support .exe applications. Google your requirements specifying that your's is a Windows based mobile..

please revert back for clarifications..

yet another useless Ipaq, relic.
ok, what now.?

no it cant. it's a PDA , it is not a phone.
it can do wifi, if lucky most cant.
wifi is an option sold new.... so can be missing.
even with it most modern routers block it.

why not just buy and old smart phone.
use that.
avoid PDA like the plague.

First sorry for my bad english.I have a same PDA (acually its dead :-( ) And me too had this problem.Try moving a little bit your pda on cardle, or (this looks like crazy but actually worked for me) do not fully put in the cardle into pda.I mean dont stick in into cardle, just a little bit.

Hi, I suggest clicking on the link below. This will walk you thru setting up a support case in the country you are currently in. After the case is set up you may be able to get HP to send you a box to ship the phone to them for repair. Here is the Link http://www1.itrc.hp.com/service/mcm/countrySelection.do?action=submitcase&lang=en&prodSeriesId=430120&cc=us&admit=-682735245%201178311397560%2028353475 I hope this helps.

If after a hard reset the PDA doesn't give you back the sms folder, it is most likely to asume that a ROM reinstall must be done. If you have a USB sync cable, check the HP site and download the ROM version for your Ipaq. Carefull with the rom upgrade, it's a simple process but must be done with care and by the instructions given there.

@Fanara

in the fall the simcard reader or the sim card connectors where damaged.

I would take the pda to a professional for analysis.

old mixed with the new. this toy PDA is 14 year old today.
do you own the router or the ISP or phone company?
you mean wifi, wireless has many forms!
the new router is using security that the old IPAQ cant do.
you have 2 choices
1: change THE ROUTER to weak encryption (and risk all other computers using it)
2: or get rid of the IPAQ, they are junk now. old and obsolete and no support, HP retired them, as legacy status.

if your read the manual for the IPAQ, it clearly shows its limits.
lots.
spec. 802.11b
WEP 64/128-bitcompliant to IEEE 802.11Compliant to 802.1X (EAP-TLS,PEAP)WPA

see the lack of WPA2?
if you set up your router to be wpa2 only as most folks do for
max security and ISP do,, no IPAQ like this works.

to others reading the battery just pops out on this newer model
then see a white sticker that sticker shows if your PDA
was opted with wifi and or bluetooth, there.

on the pda menus , labeled WIFI
make sure all off is not set to on, on main screen
click settings.

chapter 7 in the manual covers this.
turn it on
turn off ipaq wifi power saving mode, or it will fail.



the 3 lines in read below
must match your routers setting.
for example min router has WEP turned off so i cant get hacked.
wep is no longer secure.

https://www.manualslib.com/download/850185/Hp-Ipaq-Rx3000-Series.html

it can connect
but the rules are very restrictedhttps://www.manualslib.com/download/850185/Hp-Ipaq-Rx3000-Series.htmldu,