Tape Holder will not re-insert

hi
i am dammika
from sri lanka
i have a jvc handy cam
but it broken display ribbon
i want by it in sri lanka
how can i get
pls send me a sms 0094778280849
thanks u

You should open the tape holder meatal ther may be 4 screw! take it off! and release your tape! don't do it again with the power on it might get damage inside! enjoy man n try it!

moisture in the cassette holder. Take out the cassette, leave the holder door open for a couple of hours in a dry, warm location, and it should work again.

Follow what they say

The vlatch to spring the basket (cassette holder) is easy to access on these. Many times the eject process will take place if the holder is released. After the door is removed the holder can be released by gentley raising the latch on the right side of the holder assembly. After the tape is out further checks can be made for damp drum or tension issues.

Problem caused by condensation sensor putting camcorder into standby mode.
Cleaned sensor with Q tip and Windex, allowed to dry, problem solved.
Solution found on The DVD Forums

Your camera needs Mechanism replacement.
Software CD is available on charge basis.

I tried every method I could find from people posting on the web, but the method that worked for me is this.

1. Eject the tape and close the tape holder.
2. Turn the camera off and remove the battery.
3. Put the battery back in. Leave the camera off.
4. Open the tape holder.
5. Slide the tape in, but as you press the holder in to accept the tape, keep your finger pressing in on the holder, being careful not to slow the tape holder from moving downward.
6. Turn the camera on.
7. If it doesn't work the first time, press more firmly to help the tape holder accept the tape.

That's it. This method seems to work for me and lets me use the camera for a long while. If the camera is sitting unused for more than a few hours, I have to do it again. And each time I insert a tape, I make sure that I keep pressing as the tape holder lowers the tape.

Try inserting another tape first. If the trouble is still there,Defective mechanism, a stucked mechanism is present. camcorder are smart it can detects error and shuts down itself for safety. earlier models dominoes the defect if the user is not quick enough to react when something goes wrong with the camera. You need professional service to fix it.

Yeah i have a PV-GS70 and the same thing happened to me. The casing is still open as we speak. Im taking it to a camera shop tomorrow