F-1 message I brought a house a few months ago has the Amana smoothtop convection oven unit , I arraived home this evening to a F-1 error message. I reset the oven it turned off for a bit then came back on with the beep. I reset the breaker and it seemed fine for 5 minutes then the F-1 message and beep came back. The previous owner left no manual so I do not know what F-1 means fr my oven. Susan

Amana Appliance Fault Codes - PartSelect

www.partselect.com/JustForFun/Amana-Appliance-Fault-Codes.aspx

Fault codes for Amana ovens, range, stoves including dual convection wall overs and 'big ovens'. ... F3-1 - Oven Temperature Sensor/Circuit Failure - Check wire connections and ... what does it mean when the oven turns off and f3 shows ... My Amanaagds902ww gas range flashes "Door" when attempting to light the oven.

Amana Gas oven Fault Code F3 - Appliance Repair Forum

forum.appliancepartspros.com/oven...ranges-cooktops/143114-amana-g...

Nov 17, 2010 - 2 posts - ‎1 author
Have a Fault Code F3 display on oven when trying to set oven ON. Researched ... Yes, your F3 code would indicate a sensor circuit problem, Jenn-Air Electric Range Code F3
4 posts
Mar 15, 2011
Range keeps giving error codes E0/F3 and E4/F3 and the ...
5 posts
Nov 22, 2010
Replaced Sensor Still Getting F3 Error
4 posts
Sep 20, 2008
F3 Error code on whirlpool Range
4 posts
Sep 10, 2007
More results from forum.appliancepartspros.com

Amana Fault Codes - Appliance Help O

MET8776BS Maytag Gemini Smoothtop Double Oven Range

reviews.us-appliance.com/.../MET8776BS-Maytag-Gemini-Smoothtop-D...
Rating: 4.5 - ‎94 reviews MET8776BS Maytag Gemini Smoothtop Double Oven Range - Stainless Steel - Reviews ... Really like the features, however one burner doesn't work, after a month.... 2 ovens sure beats the storage bin underneath! the only negative I can think of is ...I bought my double oven a few months ago and am very happy with it.

F5 = EOC electronic control failure replace electronic control is stated in the service manual. If you have any further questions message me them back. Thank you
Rick

How to Buy Appliance Parts Online


Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

Microwave Oven Basic Troubleshooting Tips

heatman101

if you have a warranty get a new one installed they have to honor your warranty or better yet if they want payment you want new unit sometimes they come deffective from the factory ad you may have gotten one of them

My oven was locked and would not open. No lock light was on but the oven was clearly locked. F9 error when I hit certain buttons.

Try this. I unplugged the oven for about 5 minutes. Plugged back in. A LOCK light came on. Held down "Oven Cancel" for a few seconds. Door opened and lock light went off. No more F9 error when I hit those buttons.

lillylaroo,
Hi, welcome to fixya,

You said,you are about to close on a new house and the home inspection noted the oven does not work. It's an electric Amana convection range, model # ARTC7114WW. error message on display is F4

If you want you can try to reset the system of the rang by throwing off the breaker for 5 minutes and then trying it to see if it reset!
But it's old and this may not work on that range!

This oven is 10 years old from 1999.
The seller must fix it or you will not buy his home!
It is a buyers market! You have the power to demand anything you want within reason, or not.

People have houses on the market for a year now and can't sell them!
Didn't your home inspector tell you that the seller can not sell the home without a working range?

In New Jersey you can only take your fridge when you sell your home and the home owner must leave a working range !
Even if you expect to replace it once you move in, the seller must give you a working range.
Tell them you want $999.00 off the final sale price because you must replace the range!!!!!!!!!!!!!!

The error message F4, is for the seller and not the buyers problem to fix or repair !
Let me know what you find.

Now that I gave you good fatherly advice!
I wish you all the best in hat ever new home you buy!
Bless you,

Please leave a rating before you leave our site!
Thank You Huuum

F0 & F1 EOC (Electronic Oven Control) failure Replace EOC (Electronic Oven Control)

sure its possible, sounds like you've blown an over limit thermostat behind stove, gets too hot and for safety reasons cuts off unit untill replaced

F1 code and continuous beeping. This is a common problem with that type of Amana control. The control panel has a design problem I think, and it gets dirty and worn over time. I have replaced mine once, and it happened again less than 2 years later. I took the control panel out, and inspected it. I found a web solution, that said to shim the control panel out away from the housing slightly because it rubs on the metal around the opening and damages the control board contacts. I could see little scratch marks on the plastic skin around the edge of the button area, so that made sense. I tried that, and it still did not work.....panel was still beeping. Mine seemed to be the timer control that was going on and off, and then eventually an F1 error. So, I took the panel out again, and actually peeled the control surface off of the control board. No going back now, I thought. I got it off....it is really sticky.......and looked at the control panel itself . It looked fine, but there was a lot of gunk and wear marks around the edge of the plastic button area. I cleaned it up with alcohol swabs, and checked to make sure none of the printed circuit paths had any wear or damage, and then put the cover back on the board. It was still sticky enough to go back on, and stay in place. I reinstalled it, and "bingo" no more problem. It has been fine for 3 months now. Yahooo! The pic below is just an example pic from the internet. My model is slighty different, but the panel looks basically the same.