Polaroid tv goes immediately off after turning on

This is a common problem with Polaroid sets. I would check the power supply/inverter board for any capacitors with bulging tops. The typical ones that cause this problem are 10uf 450V caps.

tried with other files doesn't work like mpeg4, divx and jpeg?

Sorry this tv can't be fix acept replaced the whloe picture screen panel itself,the tvs screen panels are in of the limited production by the tvs industries,only can buy picture screen panel from the tvs themselves and it 90% important to the tv,will cost u the same as a new tv to get picture screen replaced.Sorry doesn't worth as a whole tv anymorre the tv now only worth as salvages tv for it electronic boards for spare parts for other tv,that it.

FAULTY POWER SUPPLY OR INVERTER PANEL ON BACK OF SCREEN

AVERAGE REPAIR COST £60 TO £80+

Ur tv now power on only have picture few mins,than dead,have sound only?Yes,than the 1 or 2 the long board call the LCD inverter boards are dead.The LCD inverter long boards help the LCD screen to have a backlight to produced a picture.Tries websites like Shopjimmy.com,Ebay.com to buy 1 or 2 long LCD inverter boards for the replacement.

you'll need a new panel, or a new TV, sorry

Polaroid's power supplies have been notorious in early models...suspect this is where your problem is. If you are out of warranty, the supply is usually located dead center in the back of the TV. Easy to get out, easy to put in...not sure of the money. Mine was a hundred bucks, but I bought it from a third party. Good luck.

Hello:
37 inchs have a television of the problem is that it works like 10 minutes and turns off the image, has sound but no image, turn off and on again returns to normal work and 5 minutes the picture goes but still sound, can you help?

if you replaced the supply board then there is issues with the decoder board as you would need to chec kthat and see if its not the issue.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

blown caps in powe supply they will be domed from venting