Dimplex oil heater FR24. 2400W oil heater. shorts fuse box

No circuit diagram available. The circuit board is obsolete.

https://www.uk-spares.com/products/heating/domestic/electric-fires/fire/optiflame/brayford/bfd20n

https://www.google.com/search?q=dimplex+bfd20n+circuit+diagram

You may be able to get the board repaired locally. Google 'PCB Repairs'.
..

I would replace the whole unit itself. It's obviously shorting. What kind of vacuum is it and how old?

To purchase a new 3-way rocker switch, contact Dimplex Tech Service 1-888-346-7539.

Hope this helps and thanks for choosing FixYa.

20 years old! I serious doubt that there is an Owners Manual or schematic still in existence, However, if you want to give it a shot call DImplex Customer Support to see if they can help you.

If you live in the UK call 0845 600 5111
If you live in the US call Dimplex Technical Service 888-346-7539

Hope this helps you find what you need.

Sadly, the short answer is "No, not safely". Because, repairing it won't solve the problem of why it started leaking in the first place.

Sorry, I wish I had better news for you.

Replace the fan resistor located under dash near passenger side on the side of the heater box.

Hi,
It may be that the off peak to your house has failed to switch on, possibly due to the off peak time switch in your meter cupboard not working, I suggest you contact your local electricity board and ask them to check your off peak supply

you could have a defective start switch on the dryer motor, bad motor bearing making motor drag and draw excessive current or a heater element shorted to the dryer case

1) Short in the dryer heater element.
2) Breaker / fuse is not high enough amperage for dryer.
3) Too much running on the same circuit as the dryer.

yes
go to your fuse box if 220 flip both switches if fuse engaged there will be like a red line or fully difused down to show that fuses has been triped
if 110 your going to be flipping switches alot cause 110 runs both motor and guages together and over power is usually the cause of this
220 circuit one 110 runs the guages and the other 110 runs the motor and heater core
also washer wont run with out the water being on saftey feature