Press and hold the Power button, and, whilst keeping it pressed, briefly press the reset pin with the stylus pen (a paper clip would also do the job). When the 'Palm Powered' logo comes up, release the Power button. A warning message asking for confirmation will appear. Confirm by pressing the D-pad's Up button.
By the way, if you happen to miss your device's user guide, feel free to download it from this location.
Hope you are able to sort your problems out.
Regards,
Carlos
SOURCE: Need to delete contacts in Palm Tungsten E2
try 2 select all amd delite
Ravindran
[email protected]
SOURCE: urgent response needed
1 press and hold the power button
2 while holding the power button, use the stylus to press the rest button on the back
3 wait for the "palm powered" logo to appear and then release the power button
4 when you see the warning message
either press "UP" on the 5 way navigator to reset
or
press any other button to do a soft reset
Best of luck
SOURCE: No response to hard reset
try pulling the battery out and leaving it set for a while. if that dont work are you getting any sound? or just nothing at all? besides the back light working?
SOURCE: How do I make a hard reset on my Palm Zire 31 PDA?
I did not write the posting attributed to me. I have a Palm Tungsten E. My Dad had been using it and I needed to know how to do a hard reset so it would accept my info. I found that on the Palm site after looking on your site. I performed the hard reset and hot synced the Palm with my info.
Thank you, Sue Nutt
SOURCE: Forgot my password for my Palm Tungsten E2
well you have to think deep go into a spiritual memory laps and try and resolve your deep inner confrontations help your self and YOU will find the answer.
755 views
Usually answered in minutes!
×