Macally BTMicro Mouse Logo

Related Topics:

Question about Macally BTMicro Mouse

Open Question

When I pair the bt Micro Mouse with my Toshiba laptop it is recognized as a bt Micro Mouse but does not function as a mouse. Clicking mouse buttons has no effect. Moving the mouse does activate the led so the motion-sensor appears to work. i am using a non-macally bluetooth adapter. Is there a driver for the mouse?

Posted by Anonymous on

Ad

2 Related Answers

tom19511

Thomas Christopher

  • 1601 Answers

SOURCE: trouble pairing my bluetooth Macally BT micro mouse

Q: After pairing my mouse, the button click works but cursor tracking does not move. What can I do?A: The cursor tracking problem is because red sensor LED is not on. Please try another set of battery or fully charge battery again, and verify if bottom red LED turns on. If red LED still does not turn on, please remove batteries from mouse, press and hold the pairing button for 5 seconds, next press and hold the left and right buttons simultaneously for 10 seconds, followed by several clicks. Install the battery into mouse, you should see red LED turns on, mouse cursor will move.

Posted on Nov 23, 2007

Ad
tom19511

Thomas Christopher

  • 1601 Answers

SOURCE: Pairing my Macally BT micro mouse

Q: After pairing my mouse, the button click works but cursor tracking does not move. What can I do?A: The cursor tracking problem is because red sensor LED is not on. Please try another set of battery or fully charge battery again, and verify if bottom red LED turns on. If red LED still does not turn on, please remove batteries from mouse, press and hold the pairing button for 5 seconds, next press and hold the left and right buttons simultaneously for 10 seconds, followed by several clicks. Install the battery into mouse, you should see red LED turns on, mouse cursor will move.

Posted on Nov 23, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

I have a europort mpa40 BT pro. the blue tooth light is flashing. It won't connect to my lap top.

Make sure your laptop is bluetooth capable and both are available to be paired.
0helpful
1answer

I cannot connect my Toshiba Modle P875-S7200 Bluetooth Mode so it can pair with my Bluetooth Speakers what can i do to fix this problem

so what makes you think the laptop has BT?
its and option on all PC made, when new (check this first)

is this the only BT device you own? do tell.
and can be added to any PC on earth with a BT USB dongle stick.
for like $4
what is the distance to the speakers (BT uses radio signals weak)
10ft 50 ft (10 meters) what? distance matters on all transmitters regardless if BT, wifi, wlan, or 3g/4g/. etc...

BT comes in 2 power settings, some devices do not use high power mode. (on speakers this would make for best)
does the speakers pair with any other PC? with BT?

the speakers if not junk has RTM manual. and read the page on
how to reset pairing.
BT loves to memorize your favorite devices, so if problems happen.
learn how to reset that memory , call reset pairing history.
0helpful
1answer

How do I install / activate iLIVE ISB223 wireless speaker to my toshiba satellite?

Make sure that your laptop's BT is activated via control panel. The BT ought to show up in Device Manager. From there, you'll find a "pairing" button on the speaker- press that & follow onscreen prompts on the laptop.
0helpful
2answers

Digix BT-100 Portable Bluetooth Wireless Speaker is not recognized by my android MOTO X cell phone.

Is the speaker paired with another device?

You may try turning off the bluetooth on your phone, turning off the speaker, turning back ON the speaker and then turning on the bluetooth on your phone again. This should reset the phone to SEARCH for BT-100.

Once you SEARCH for available devices you should see BT-100 on the list. Select BT-100 and it should pair. If it does not CONNECT be sure to press BT-100 again to connect. The speaker will BEEP, indicating that the speaker and the phone are now connected.

If you continue to have trouble feel free to contact the manufacturer at [email protected] or going to http://www.contelusa.net
0helpful
1answer

How you play music on jabara bt 2050 0n phone

first you have to pair your blue tooth device to your phone,first you turn the bt power to on on your phone menu,next you have to put your blue tooth device headphones into discovery mode,now most bt manufactures use the power button for this feature,by holding the power button down for 6 to 10 seconds when you turn the bt device on it usually puts the bt intodiscovery mode.a solid light usually remains on on your blue tooth device,then you can search or add new device from your phone menu.once they have paired or recognized you will need a pin pairing code.Most manufactures of blue tooth devices use a factory 4 digit pin pairing code ,they are as follows0000,1234,9999,or1111 i hope this helps
1helpful
1answer

Won't pair with bluetooth. Just unistalled it now I can't re-install it.

Switch off the mouse. Control Panel->Add/Remove Progs. Uninstall the mouse drivers. reboot the PC. Install the mouse drivers from the CD that came with it. Reboot. Now power on the mouse and let BT talk to BT. It should connect now.
0helpful
1answer

I can't operate the mouse. its not working.

Install fresh batteries, turn it on and make sure your bluetooth dongle is installed and active. If you have never paired this mouse with it's receiver, then you will have to put them both into pairing mode, and once paired you should have no problems.
1helpful
1answer

Pairing my Macally BT micro mouse

Q: After pairing my mouse, the button click works but cursor tracking does not move. What can I do?A: The cursor tracking problem is because red sensor LED is not on. Please try another set of battery or fully charge battery again, and verify if bottom red LED turns on. If red LED still does not turn on, please remove batteries from mouse, press and hold the pairing button for 5 seconds, next press and hold the left and right buttons simultaneously for 10 seconds, followed by several clicks. Install the battery into mouse, you should see red LED turns on, mouse cursor will move.
0helpful
1answer

Trouble pairing my bluetooth Macally BT micro mouse

Q: After pairing my mouse, the button click works but cursor tracking does not move. What can I do?A: The cursor tracking problem is because red sensor LED is not on. Please try another set of battery or fully charge battery again, and verify if bottom red LED turns on. If red LED still does not turn on, please remove batteries from mouse, press and hold the pairing button for 5 seconds, next press and hold the left and right buttons simultaneously for 10 seconds, followed by several clicks. Install the battery into mouse, you should see red LED turns on, mouse cursor will move.
0helpful
1answer

TomTom 5 BT mouse: no Connection

A friend of mine uses the same software for his PDA. I have asked him what the problem can be and he told me that some kind of “connection registry” or something like that is very important. Start PDA and start the Bluetooth. Go to Bluetooth symbol and choose BT settings. There must be shown some “magnifying glass”. Click on it and the search will start. All visible objects will be listed in the upper part of window. Mark the GPS and it will be listed in lower part of window. Click on it and start this “connection registry”. After that you can use the navigations software. Go to “GPS status” and there you must put some check mark on some green quadrangle. Sorry I can not explain you exactly what it was but I am sure that in User`s manuals of TomTom you can find a right explanation.
Not finding what you are looking for?

48 views

Ask a Question

Usually answered in minutes!

Top Macally Computers & Internet Experts

Paul Bade

Level 3 Expert

1744 Answers

Mike

Level 3 Expert

4383 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

55671 Answers

Are you a Macally Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...